Model: iBT38 Bluetooth Wireless FM Clock Radio with USB Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792
iBT38 Introduction Thank you for purchasing the iHome iBT38. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
iBT38 Table of Contents Meet Your iBT38 ..............................................................................................................4 The Display/Setting Up the Unit ..........................................................................................5 Setting the Clock .............................................................................................................6 Setting and Using the Alarm/Previewing the Alarm and Turning the Alarm On/Off ...................
iBT38 Included • iBT38 system • 100V-240V universal AC adaptor • Stereo audio cable iBT3 iB BT3 T 8 iBT38 power adaptor 3 Stereo audio cable
iBT38 Meet Your iBT38 Top Power Button Bluetooth Pairing Button Sleep Button Microphone Alarm 1 Button Talk/End Call Button Alarm 2 Button Plus/Minus Settings Buttons Volume Up/ Volume Down Buttons snooze | dimmer Play/Pause and Presets Button Mode Button Snooze/Display Dimmer Button Bottom Back DC 9V, 1.
Using the The Display PM/AM Indicators iBT38 Time/Radio Frequency Display Bluetooth Pairing Indicator Alarm Active Indicator Low Backup Battery Indicator Mode/Wake to Alarm Source Indicators: Bluetooth device, Radio, Tone Sleep Mode Indicator Aux-in Mode Indicator Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. Extend FM antenna. CR2450 3V battery is included for battery backup.
Using the Setting the Clock iBT38 1. Press and hold the Time Set Button located on the back of the unit for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. 3.
Setting and Using the Alarm (Continued) Using the iBT38 4. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth, radio or tone. Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to current Tone. Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset to wake to, or press the – or + Buttons to tune in a desired wake to station.
Using the FM Radio iBT38 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Extend the FM antenna for best reception. 3. Press the or Buttons to adjust the volume on the unit. 4. When you are through listening, press the Button to turn the unit off.
Using the Using FM Radio in Other Countries iBT38 Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. 2. Press and hold the Mode Button until “USA” appears in the display. 3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA. 4. Press the Mode Button again to exit frequency setting mode. 2 beeps will confirm setting.
Using the iBT38 Pairing Your Device Via Bluetooth Whenever AC power is connected, the iBT38 will attempt to autolink to a previously paired device. If no device is paired, the iBT38 will automatically enter pairing mode for 2 minutes. You can manually initiate pairing g without turning on the iBT38 by following steps 1-3 below. 1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings) . 2.
Using the Playing Audio Via Bluetooth 1. 2. 3. 4. 5. 6. iBT38 Press the Button to turn the unit ON. Press and release the Mode Button as needed until the BT icon appears on the display. Press the Presets Button on the unit to play audio from your linked Bluetooth device. Press the – or + Buttons to go to the previous or next track. Press the or Buttons to adjust the volume on the unit. When done listening, press the Button to turn the unit off.
Using the Playing Audio via Aux-In iBT38 1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on 2. 3. 4. 5. 6. the back of the unit and the other end into the headphone or output jack of your audio device. Press the Button on the unit to turn it on. Press and release the Mode Button as needed until the AUX indicator icon appears on the display. Place your audio device in play mode. Navigate tracks and adjust output volume on the device.
Using the Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it. iBT38 NOTE: Unit must be plugged into working outlet to charge devices .
Troubleshooting Unit doesn’t respond (no sound) • • • • Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT38. Make sure the Power is ON. Make sure volume is up on your Bluetooth device and on unit. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup batteries. Let unit stand for 2 minutes.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
iBT38 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOIBT38 IC: 986B-IBT38 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
