iBT31 Eng IB Size: 153mm x 120mm Printing color: Black July 15, 2014 P1 iBT31 Bluetooth Wireless FM Clock Radio with USB Charging EMBED COVER ART OF iBT31 instruction manual Questions? Contact Customer Service at 1-800-288-2792
P2 iBT31 Introduction Thank you for purchasing the iHome iBT31. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 iBT31 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOIBT31 IC: 986B-IBT31 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P4 iBT31 Table of Contents Meet Your iBT31 ..............................................................................................................5 The Display/Setting Up the Unit ..........................................................................................6 Setting the Clock .............................................................................................................7 Setting and Using the Alarm/Previewing Alarm ........................................................
P5 iBT31 Included • iBT31 system • 100V-240V universal AC adaptor • Stereo audio cable audio cable iBT31 power adaptor 4
P6 iBT31 Meet Your iBT31 Top Sleep Button Talk/End Call Button Bluetooth Pairing Button Power Button Alarm 1 Button Alarm 2 Button Plus/Minus Settings Buttons Volume Up/ Volume Down Buttons Play/Pause and Presets Button Mode Button ZZZ (Snooze)/Display Dimmer Button Bottom Back DC Aux-in Jack 5V 3A DC Jack Antenna USB Charging Port Backup Battery Compartment (pull battery tab before use) 5 Time Set Button
P7 Using the The Display PM/AM Indicators Time/Radio Frequency Display Bluetooth Pairing Indicator Alarm Active Indicator Low Backup Battery Indicator Sleep Mode Indicator iBT31 Mode/Wake to Alarm Source Indicators: Bluetooth device, Radio, Tone Aux-in Mode Indicator Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet.
P8 Using the Setting the Clock iBT31 1. Press and hold the Time Set Button located on the back of the unit for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. 3.
P9 Setting and Using the Alarm (Continue) Using the iBT31 4. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth, radio or tone. Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to current Tone. Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset to wake to, or press the – or + Buttons to tune in a desired wake to station.
P10 Using the FM Radio iBT31 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Extend the FM antenna for best reception. 3. Press the or Buttons to adjust the volume on the unit. Note that the FM radio volume setting is stored separately from Aux-in or Bluetooth volume. 4.
P11 Using the Using FM Radio in Other Countries iBT31 Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. 2. Press and hold the Mode Button until “USA” appears in the display. 3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA. 4. Press the Mode Button again to exit frequency setting mode. 2 beeps will confirm setting.
P12 Using the Using Bluetooth: Pairing Your Device iBT31 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press and hold the Pairing Button on top of the unit for 2 seconds until the Bluetooth icon flashes on the display and a beep sounds, indicating pairing attempt. “iHome iBT31” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT31” on the device to connect it.
P13 Using the Playing Audio Via Bluetooth iBT31 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth wave indicator icon appears on the display. 3. Press the Presets Button on the unit to play audio from your linked Bluetooth device. 4. Press the – or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6. When done listening, press the Button to turn the unit off.
P14 Using the Playing Audio via Aux-In iBT31 1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. 2. Press the Button on the unit to turn it on. 3. Press and release the Mode Button as needed until the AUX indicator icon appears on the display. 4. Place your audio device in play mode. Navigate tracks and adjust output volume on the device. 5.
P15 Using the Charging Devices via USB Port iBT31 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it.
P16 Replacing and Installing Clock Backup Battery Using the iBT31 Note: 2 AA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P17 Troubleshooting Unit doesn’t respond (no power) • • • Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT31. Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source.
P18 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P19 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P20 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
