back cover iBT233 IB (English) Size: 153 x 120 mm Color: print black in white paper (1C + 1C) Dec.
P2 iBT233 Introduction Thank you for purchasing the iHome iBT233. This product is designed to provide high quality wireless sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish.
P3 iBT233 Table of Contents What’s Included ......................................................................................................................................................3 Meet Your iBT233.................................................................................................................................................. 4 The Display/Setting Up the Unit.....................................................................................................................
P4 iBT233 What’s Included • iBT233 unit • 100V-240V universal AC adapter iBT233 power adapter 3
P5 iBT233 Meet Your iBT233 Top Aux Button Sleep Button FM/Presets Button Alarm 1 Button Alarm 2 Button Bluetooth Button Power/Alarm Reset Button Volume Down/ Volume Up Buttons Plus Settings Button Minus Settings Button End Call Button Answer Call Button Snooze/Display Dimmer Button Bottom Play/Pause Button Back Backup Battery Compartment DC 5V 2A time set aux-in DC Jack Aux-in Jack FM Antenna Time Set Button Frequency Range: FM 87.5 - 107.
P6 Using the The Display iBT233 Time Display PM Indicator Alarm 1 Active Indicator Alarm 2 Active Indicator Setting Up the Unit 5 TEST T EST Remove battery pull tab before use. 1 CR2450 battery is installed for battery backup. See page 6 for details on replacing the backup battery. RESET RESET Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet. Extend FM antenna.
P7 Using the iBT233 Replacing and Installing Clock Backup Battery Note: 1 CR2450 battery is installed with the unit. Remove battery pull tab before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P8 Using the iBT233 Setting the Clock 1. 2. 3. 4. 5. 6. 7. 8. 9. Press and hold the Time Set Button located on back of the unit for 2 seconds until the clock display flashes and a beep sounds. Press the or Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The PM indicator appears to the left of the display; there is no AM indicator. Press the Time Set Button to confirm the time. The year will flash on the display.
P9 Setting and Using the Alarms (Continued) 1. 2. 3. 4. 5. 6. 7. 8. 9. 8. Using the iBT233 Press and hold the Alarm Button for 2 seconds until the alarm time display, alarm button and alarm icon flash. A beep sounds. Press the or Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the display; there is no AM indicator. Press the Alarm Button to confirm the alarm time setting.
P10 Using the iBT233 Snooze/Display Dimmer Button 1. 2. 3. 4. 5. To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds during normal operation (when no alarm is sounding). A beep will sound. Press the or Buttons to select the desired snooze time (between 1 and 29 minutes). Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps will sound.
P11 Using the iBT233 Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1. 2. 3. 4. 5. Press and release the FM Presets Button. The FM current FM station frequency appears on the display. Press and release the FM Presets Button as needed until the preset number (P1- P6) you wish to set is displayed, then press and hold the FM Presets Button to enter setting mode.
P12 Using the iBT233 Pairing Your Bluetooth Device Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT233. to a previously paired device. Once your device is paired, the iBT233 can recognize it and you can play your audio through it. For manual pairing, follow steps below. 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). 2.
P13 Using the iBT233 Playing Audio via Bluetooth 1. 2. 3. 4. 5. Press the Bluetooth Button to turn the unit ON in Bluetooth mode. “bt” appears on the display and the Bluetooth Button lights up. Press the Play/Pause Button on the unit to play audio from your linked Bluetooth device. Press the or Buttons to go to the previous or next track. Press the or Buttons to adjust the volume on the unit. You may need to adjust the volume on your device, too.
P14 Using the iBT233 Playing Audio via Aux-In 1. 2. 4. 5. 6. Connect one end of a standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. Press the Aux Button on the unit to turn it on in AUX mode, indicated by “AUX” on the display and the Aux Button lighting up green. Place your audio device in play mode. Navigate tracks and adjust output volume on the device.
P15 Using the iBT233 Charging Devices via USB Ports Generally, the 2.1 Amp port charges faster than the 1 Amp port. 1. Connect the standard size end of a USB cable (not included) to one of the USB Ports on back of the unit and connect the other end to the charging port on your device. It’s often best to use the charging cable supplied with your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Ports.
P16 Using the iBT233 Battery Use Cautions and Tips • • • • • • • • • • • • • Only use the recommended/supplied batteries or equivalent. Use alkaline batteries for longer life. Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries. Insert batteries with proper polarity (+/–) as indicated. Remove exhausted batteries from product. Recharge rechargeable batteries under adult supervision. Do not attempt to recharge non-rechargeable batteries.
P17 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P18 iBT233 FCC Information FCC ID: EMOIBT233 IC: 986B-IBT233 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P19 Unit doesn’t respond (no power) • • • Troubleshooting Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT233. Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source.
P20 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
