iBN43 IB Size: 153mm x 120mm Printing color: Black Dec. 22, 14.
P2 Introduction iBN43 Thank you for purchasing the iHome iBN43. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, or other Bluetooth audio device. The dual alarms on this iHome clock radio can be set and used independently, so you can program each alarm to wake you up to a paired Bluetooth device, 4 separate alarm tones, the FM stereo radio, or a buzzer alarm.
P4 Table of Contents iBN43 Meet Your iBN43.......................................................................................................... 1-3 The Display/Setting Up the Unit ..........................................................................................4 Setting the Clock/ FM Radio ..............................................................................................5 Setting and Using FM Presets................................................................................
P5 iBN43 Included • iBN43 system • 100V-240V universal AC adaptor iBN43 100V-240V universal AC adaptor 1
P6 iBN43 Meet Your iBN43 Top Wakeup/Alarm Skip Button Landscape insert area Nap/Pairing Button Sleep Button Power Button Equalizer/ Time Set Button Alarm 1 & Alarm 2 Buttons ® NFC Antenna Area Microphone Volume Up Button Mode Button Volume Down Button Plus Setting Button Play/Pause/ Presets Button Minus Setting Button Talk Button Snooze/Dimmer Button End Button 2
P7 iBN43 Meet Your iBN43 Back USB Charging Port DC Jack Aux-in Jack FM Antenna DC 9V 3A Bottom Pull Tab AA x 2 Backup Battery Compartment Remove before use Remove the pull tab before initial use to activate the SureAlarm battery backup system.
P8 Using the The Display Time Display iBN43 Alarm Active Indicator PM/AM Indicators Bluetooth Indicator Low Backup Battery Indicator Date, Alarm time, Mode Indicator: Radio, Bluetooth, Aux-in Setting Up the Unit RESET R ESET TEST T EST Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet.
P9 Using the Setting the Clock iBN43 1. Press and hold the Equalizer/Time Set Button for 2 seconds until the clock display flashes and unit beeps. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the Alarm 1 or Alarm 2 Button during time setting. 3.
P10 Using the FM Radio (cont’d) iBN43 3. Press the or Buttons to adjust the volume on the unit. To adjust the tone, press and release the Equalizer/Time Set Button as needed to cycle to Treble, Bass, or Balance, then press the – or + Buttons to adjust for best sound. 4. When you are through listening, press the Power Button to turn the unit off. Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1.
P11 Using the Setting and Using the Alarms iBN43 This unit has 2 separate alarms, each set the same way. Below we explain how to set alarm 1. To set alarm 2, follow the same steps using the Alarm 2 Button. 1. Press and hold the Alarm 1 Button for 2 seconds until the alarm time flashes at the bottom of the display. 2. Press the – or + Buttons to adjust the display to the desired alarm time (hold for rapid setting). Make sure you set the correct AM/PM alarm time.
P12 Setting and Using the Alarms (cont’d) Using the iBN43 8. Press the – or + Buttons to adjust the alarm volume on the unit. Note that the alarm volume setting is stored separately from other volume settings. 9. Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed. Previewing the Alarm and Turning the Alarm On/Off 1.
P13 Using the iBN43 Snooze/Dimmer Button 1. To program Snooze, press and hold the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 1 and 29 minutes). 3. Press and release the Snooze/Dimmer Button to confirm Snooze setting. 4. While the alarm is sounding, press and release the Snooze/Dimmer Button to temporarily silence the alarm for the set duration (9 minutes is the default).
P14 Using the iBN43 Using Bluetooth: Pairing and Playing Your Device Using NFC This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Using Standard Bluetooth”. 1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on Bluetooth and NFC capability as described in the device’s user manual. 2. Place your NFC–enabled device in play mode. 3.
P14 Using the Pairing Your Device Manually iBN43 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press the Power Button to turn the unit ON. 3. Press and release the Mode Button as needed until “BLUETOOTH” appears on the display. 4. Press and hold the Nap/Pairing Button on the top of the unit for 2 seconds to begin pairing the unit with your device. The Bluetooth icon will flash on the display, indicating pairing attempt.
P15 Using the Playing Audio Via Bluetooth iBN43 1. Press and release the Mode Button as needed until ”BLUETOOTH” appears on the display. 2. Press the Play/Pause/Presets Button on the unit to play audio from your linked Bluetooth device. 3. Press the – or + Buttons on the unit to go to the previous or next track. (This function may be disabled on some devices). 4. Press the or Buttons to adjust the volume on the unit.
P16 Using the Playing Audio via Aux-In iBN43 1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. 2. Press the Power Button on the unit to turn it on. 3. Press and release the Mode Button as needed until “AUX-IN” appears on the display. 4. Turn on your audio device and put it in play mode. 5. Press the or Buttons to adjust the volume on the unit.
P17 Using the Using FM Radio in Other Countries iBN43 Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. Press and hold the Mode Button for 5 seconds until “USA” appears in the display. 2. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA. 3. Press the Mode Button again to exit frequency setting mode.
P18 Using the Replacing and Installing Clock Backup Batteries iBN43 Note: 2 AA batteries are included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P19 Troubleshooting Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBN43. • Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) The unit may need to be reset. To do so, disconnect the unit from AC power and remove the backup batteries. Let unit sit for 3-5 minutes. Re-install backup batteries and reconnect to AC power.
P20 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P21 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P22 FCC Information iBN43 FCC ID: EMOIBN43 IC: 986B-IBN43 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s).
P18 Information FCC/IC iBN43 FCC ID : EMOIBN43 IC : 986B-IBN43 Déclaration de la FCC sur l’exposition aux radiations Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
P23 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
