User's Manual

ManualsBrandsSDI Technologies ManualsElectronicsHotel Bluetooth Universal Bedside Spesker System

HDL50

Sta Quick Start Guide

Included

• HDL50 system

• 100V-240V universal AC adaptor

Set Up

Connect AC adaptor

to DC jack/wall outlet

Remove pull tab from Backup Battery

Compartment located on bottom of the

unit. When Low Battery Icon appears on display,

replace backup battery with 1 fresh CR2450

battery. Keep unit connected to power when

replacing battery or you will lose settings.

Remove thumbscrew

and remove back cover to

access sta controls

Secure the attached Security Tether to

a wall or other permanent surface.

CAUTION: DO NOT attach to an AC

outlet or cause it to become entangled

with anything that can create a

hazardous situation.

-1 +1 auto

DST

time set time zonetime sync high low

volume level12VDC 35000mA

12V 3.5A

outlet

The unit ships with the Daylight Saving Time (DST) switch in

Auto position, and will automatically adjust when the time

changes in March and November.

Setting Clock Using Time Sync

Daylight Saving Time

a) Connect a Lightning-compatible

iPhone to the Dock

Press the Time Sync Button

on the back of the unit to instantly

set the time on the HDL50.

NOTE: For the fastest, most accurate time setting,

set the clock using Time Sync with

a) a docked iPhone OR

b) an iPhone connected to the USB port

iPhone time is always current because it pings oﬀ cell towers;

iPad or iPod are only accurate to the last time they were

synced to a computer.

Make sure the DST switch is in AUTO position.

If you do not have an iPhone or if time sync fails,

set the clock manually.

b) connect any iPhone to the USB port using

the USB cable that came with it

-1 +1 auto

DST

time sync

snooze/dimmer

function

talk

endpower iPod/USB/radio

Bluetooth/line-in

alarm

on/oﬀ

wake-to

presets

alarm

set

pairing

1- place your device into “discoverable” mode

2- press and hold“pairing” button on unit for 2 sec

3- if prompted, enter code “0000”

4- your device is now paired. You can answer and

end calls by pressing “talk” and “end”

to use Bluetooth

1- press “alarm set” button

2- use </> to set desired wake-up time

3- press “alarm set” button again to conrm

4- press “wake-to” button to switch between

waking to your iPod, USB dock, radio, or buzzer

to use alarm

Manual Clock Setting

Press the Time Set Button

Press the or button to set time

Press the or button to set year

Press the or button to set date

Press the or button to tune to

a desired station (hold to search for

next clear station)

time set

Press and hold the Time Set Button

2 SECS

time set

Press and hold the

Time Set Button

2 SECS

time set

Press the Time Set Button

to conrm Clock Setting

time set

Beep

time set

Press the Time Set Button

to conrm

Beep

Setting 12/24 Hour Time Display

FM Radio

FM Presets

To toggle time display

between 12 or 24 hours,

press alarm set button

alarm

set

Press function Button

as needed to cycle to

FM mode

function

iPod/USB/radio

Bluetooth/line-in

Press FM presets Button

to cycle to the preset

(P1- P6) you wish to set

Press FM presets

Button to conrm

Follow steps above to set all 6 FM presets

Once sta has completed setup, replace security cover on

back of unit and tighten thumbscrew.

Beep

Press the or button to

select station to preset

presets

Press and hold FM presets

Button to conrm preset

number

presets

HDL50 Quick Start Guide - Front

Size: 432 x 140 mm

Printing Color: Black

Mat’l: 100 gsm WF paper

Mar. 21, 13.

HDL50 Quick Start Guide - Inside

Size: 432 x 140 mm

Printing Color: Black

Mat’l: 100 gsm WF paper

Mar. 21, 13.