Safety Instructions

FRONT BACK
XX-B36 IB (English)
Size: 120 x 150 mm (folded: 60 x 37.5 mm)
Printing color: Black (1C + 1C)
Material: 80 gsm WF paper
Jan. 23, 2020
POWER ON/OFF
- Press and hold the Button for 2 seconds to turn the headphones ON or OFF.
BLUETOOTH PAIRING
- Press and hold the Button for 2 seconds to turn the headphones ON. The headphones
will enter pairing mode and the LED indicator will flash blue and red.
- Select ‘ekids B36VM’ on your Bluetooth-enabled device to connect.
- A tone prompt will sound to indicate pairing is complete. Once paired, the headphones
will automatically connect to your Bluetooth device whenever it is in range.
- When audio is playing, press the Button to play or pause.
- Use the controls on your device to navigate tracks and adjust the volume of streaming
audio.
- If no audio is playing for 60 minutes, the unit will automatically shut off to conserve the
battery. Press the Button to resume operation.
SPEAKERPHONE
- Press the Button to accept an incoming phone call.
- Press and hold the Button to to reject an incoming call.
- Press the Button to end a phone call.
FCC Information
. T
his equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3(B)
IC Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF
exposure, users can obtain Canadian information on RF exposure and compliance.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non
contrôlé. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à
l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1 Do not use this product near water, and clean only with dry cloth.
2 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
11 Do not dispose of batteries in the household trash or fire.
©2020 Tech2Go
All Rights Reserved.
CHARGING THE HEADPHONES
USB AC
adaptor
(not included)
USB charging cable
(included)
Model: B36 Series
Wire
less Headphones
Product Marketing Name (PMN)：SM-B36VM.EXv0
CHARGE BEFORE USE
B36_012320-A
Printed in China
The LED indicator (located on the right ear cup) will glow red while the headphones are
charging, and will automatically turn off once fully charged.
FCC ID : EMOB36A
IC : 986B-B36A
HVIN : B36a