How-To Guide

Step 1 Step 2
Step 3
CO-730 - IB (English)
Size: 165 x 180 mm (folded: 82.5 x 60 mm)
Color: 1C + 1C (Black)
Material: 80gsm wood free paper
July 21, 2022
Charging the Battery
ATTENTION: Charging the battery should only be performed by an adult.
Follow these instructions:
1. Connect the larger plug of the included USB-C charging cable to the
powered USB port of a computer or a USB/AC adapter.
2. Connect the smaller plug to the USB-C charging port on the back of the
unit.
3. The charging LED flashes red when the unit needs to be charged, glows
solid red while charging, and glows solid blue once fully charged.
Controls
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and , if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
CAN ICES-3 (B)/NMB-3(B)
GENERAL BATTERY PRECAUTIONS
Never use or charge a battery if it appears to be leaking, or in any way
abnormal.
Avoid charging battery when the temperature is not within 5°C - 35° C
(41° - 95° Fahrenheit).
Never expose a battery to any liquid, or to excessive heat such as
direct sunlight or fire.
Never leave in an unventilated vehicle where excessive internal
temperatures may be encountered.
Always keep batteries out of the reach of infants and small children.
Always charge lithium devices on a non-flammable surface - wooden
tables/ carpeted floors are not recommended charging surfaces.
If the unit is to be unused for an extended period of time, such as a
month or longer, charge the unit fully before storage.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change or disassemble the built-in battery. Doing
so will void the warranty and could cause personal injury and
damage to your device.
Do not dispose of batteries in the household trash or fire. Always
dispose of used batteries/electronics in accordance with the
prevailing community regulations.
To find a drop-off location near you, visit www.call2recycle.com
Maintenance
It is important to keep the unit as dry and clean as possible. Clean the
unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials are not
recommended, as they may damage the surface of the unit.
Questions or Comments
For questions or comments regarding this or other KIDdesigns
products, please visit our website: www.kiddesigns.com
Important Message to Customers
Thank you for purchasing one of our many top-quality electronic
products. Please take a moment to read through these instructions to
help you understand the safe and proper way to use this toy to extend
its usability.
Limited 1 Year Warranty Information
KIDdesigns warrants this product to be free from defects in
workmanship and materials, under normal use and conditions, for a
period of one year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to
first return it to the store where it was originally purchased. Should this
fail to resolve the matter and service still be required by reason of any
defect or malfunction during the warranty period, KIDdesigns will repair
or, at its discretion, replace this product without charge. This decision is
subject to verification of the defect or malfunction upon delivery of this
product to the Factory Service Center authorized by Customer Service.
If service is required, please contact Customer Service at
kiddesigns.com/support to obtain a Return Authorization Number and
shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose
for which it was designed. It does not cover (i) products which have been
damaged by negligence or willful actions, misuse or accident, or which
have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to
digital media players, CD’s or tape cassettes (if applicable); (iv) the cost
of shipping this product to the Factory Service Center and its return to
the owner.
This warranty is valid only in the United States of America and does not
extend to owners of the product other than to the original purchaser. In
no event will KIDdesigns or any of its affiliates, contractors, resellers, their
officers, directors, shareholders, members or agents be liable to you or
any third party for any consequential or incidental damages, any lost
profits, actual, exemplary or punitive damages. (Some states do not
allow limitations on implied warranties or exclusion of consequential
damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which
vary from state to state.
Your acknowledgement and agreement to fully and completely abide by
the above mentioned disclaimer of warranty is contractually binding to
you upon your transfer of currency (money order, cashier's check, or
credit card) for purchase of your KIDdesigns product.
Questions? Visit www.kiddesigns.com
©2022 All Rights Reserved.
CO-730-072122-A Printed in China
How to Use Musical Figures:
The unit comes with 4 musical figures - each figure plays a different
song! To add a song, place a figure on the magnetic platform on the
top of the unit. Press the Ladybug to play a song.
Note: Musical Figures will play a song in either Music Mode or Sleep
Mode. (Additional figures sold separately - each new figure will add
another song to the unit).
Music Mode:
Slide the Mode Switch on the top of the unit to Music Mode to listen
to built-in songs. Press the Ladybug to play a song. Press again to
stop. Press again to skip to the next song.
Sleep Mode:
Slide the Mode Switch on the top of the unit to Sleep Mode to play
soothing sounds and lullabies. There is also a switch on the top of
the unit with timer settings - choose between 30, 60, or 90 minutes.
Press the Ladybug to cycle through 6 tracks (3 soothing sounds, and
3 lullabies).
Using the Microphone:
Connect the included wired microphone to the microphone jack on
the back of the unit to sing along! An additional figure is included to
use as a microphone stand - place it on the magnetic platform and
rest the microphone on top.
Note: Unplug the microphone from the unit while using Sleep Mode
to avoid any feedback.
Model: CO-730
Tiny Tunes Music Melon
Demo Mode
This unit ships in demo mode for in-store demonstration
purposes. When you are ready to play, slide the
ON/OFF/DEMO Switch located on the bottom of the unit
to ON.
USB Adaptor
(not included)
OR
Computer
connected to
working outlet
Computer
USB port
On/Off/Demo
Switch
Volume
Down
Volume
Up
Sleep Duration
Switch
Music/Sleep mode
Switch
ISED statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This device comply with ISED RF exposure requirement, users can obtain
Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1)L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d’exposition RF ISED, les utilisateurs
peuvent obtenir des informations canadiennes sur l’exposition aux RF et la
conformité.
Tout changement ou modification non expressément approuvé par la partie
responsable de la conformité pourrait annuler le droit de l’utilidateur à
utiliser l'équipement.