User Manual - CONTENTS 1. Introduction 2. Precaution 3. Before Using 3.1 What’s in the box? 3.2 Appearance 3.3 Indicator light status 4. Using the dongle 5.
1. Introduction SD BT DONGLE is designed for checking results of test to mobile application and using wireless printer 2. Precaution Before use, read the warnings and other information in this manual. •Keep the dongle dry. Humidity and all types of liquids or moisture can cause harmful interface with electronic circuits. •Do not place heavy object on the device. • Avoid placing the system on slopes or vibrating surfaces.
. Before Using 3.1 What’s in the box? •Materials provided SD BT Dongle User Manual •Materials not provided Mobile print 3.2 Appearance 3.3.
. Using the dongle 1) Connect a dongle stereo jack to a terminal of the F100 Analyzer. 2) Turn on the power of the dongle. Then, the PWR light turns on if the connection is normally. 3) or CON light turns on if a mobile printer or mobile device with BLE is properly connected.
. Product Technical Information Bluetooth Standard RF frequency Wireless range Operating Temperature Condition Humidity Dimension Size Bluetooth 4.0 Class 2 2402 ~ 2480 Mhz 10 meters 0 ~40℃ 10 ~70 % 48.9*26.4*24.8mm This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
C-4th&5th, 16, Deogyeong-daero, 1556beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do 16690, REPUBLIC OF KOREA Manufacturing Site 74, Osongsaengmyeong 4-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do 28161, REPUBLIC OF KOREA