User Manual Ver 1.
ASNMTOUCHXWALLET TOUCH xWALLET SCTECHONE Co., Ltd.
Warning Please read this User Manual before using the product. We are not responsible for any cryptocurrency loss due to carelessness caused by consumers. * Changes or modifications not expressly approved by SCTECHONE CO., Ltd. could void the user's authority to operate the equipment.
Touch xWallet Device Structure Device Information Display Wallet Address or Balance Check LED Charge Display Red (Charging) Green (Complete) Fingerprint Sensor Fingerprint Scan, Power ON/OFF, or Menu Explore USB Port Firmware update or charging Fingerprint Sensor Instruction Fingerprint Sensor can turn on/off the Device besides fingerprint sensing and can be used as a navigation for the Device’s setting confirmation or change.
Start 1 2 Device Charge Device Setting 2.7 Key Generation 3 Bluetooth Pairing 2.1 2.2 Device Power Fingerprint On Registration 2.3 2.5.2 2.5.1 2.5 Study Fingerprint Usage Solve Mnemonic Words Quiz Record Mnemonic Words New Key Generation 2.4 2.6.2 2.6.1 Select Key Generation Method 2.
1. Charging Touch xWallet Device Start charging with the included USB charging cable by connecting it to the Micro USB port on Touch xWallet Device. 2. Touch xWallet Device Setting Follow the steps below for initializing Touch xWallet Device. ① Device Power On Touch the fingerprint sensor for about 2 seconds to turn on the Device.
⑥ Key Generation Using Mnemonic Words Using already recorded mnemonic words during the wallet creation, generate a key. ⑦ Key Generation For crypto wallet’s address or signature, generate a master key of key pairs. 3. Bluetooth Pairing Under phone’s Setting > Connection > Bluetooth, select Touch xWallet-XXXXXXXX from ‚available devices‛ and pair up the phone and device by the Bluetooth PIN on the device’s display. Card Info 80000082 512533 4.
Power On/Off Touch xWallet Device is designed to power off automatically after 10 seconds or more in stand-by mode for efficient battery usage. Touching the Device’s fingerprint sensor powers on and off the device. Finger scan Power off after 3 ~ 5 seconds touch on the sensor Power on by touching the sensor [Power Off] [Power On] Fingerprint Registration As Touch xWallet is designed for fingerprint-authenticated users, users’ fingerprint must be registered for proper use.
New Key Generation Touch xWallet is applied to Bitcoin’s standard (BIP32, 39, 44) for wallet management and supports HD wallet for safely protecting users’ assets. 1. Key Generation Method For a new key generation, select ‚New Key.‚ For recovering the existing wallet, select ‚Key Recovery‛ and proceed. 2. New Key Generation For a new key generation, randomly generated 24 words are displayed. Please record each word on a Recovery Sheet (Recovery sheet here after)in order. New Key Word List 1. novel 2.
3. Key Generation Word Confirmation Words on the Recovery sheet should be recorded in order accurately as they are used in key recovery. This procedure is to confirm the accurate records of 24 words on the Recovery sheet and is an ask-andanswer quiz session by looking up the right word from 1 to 24. New Key Word #1 1. Key Confirmation Quiz Word #24 1. Apple 1. Text 2. Ball 2. Satoshi 2. Select a matching word corresponding to word 1st on the Recovery sheet 3.
Key Recovery using Recovery Words As Touch xWallet is compliant to Bitcoin’s Standard (BIP32, 39, 44) for managing wallet, a wallet can be recovered using recovery words during a key generation. 1. Select Word Count Select a matching word-count as recorded on the Recovery sheet in wallet creation. Since Touch xWallet was generated with 24 words, select 24 words for key recovery. Key Recovery 1. 12 Words 2. 18 Words 3. 24 Words 2.
Bluetooth Pairing As Touch xWallet manages cryptocurrencies with BLE communication between Device and App, Bluetooth connection between device and smartphone is required. Info 80000030 405827 Under smartphone’s Bluetooth setting, select a serial number matching device as in Device info of the device from ‚Available Device‛ list in the form of Touch xWallet. Bluetooth PIN Check System xWallet 3/3 Card Info 1/2 80000030 405827 1. System menu 2. Card info select 9 3.
Touch xWallet App Install Touch xWallet App can be installed by searching touch xwallet on Google Play store or itunes app store. Touch xWallet App Start With proper Touch xWallet App install, it can be started by clicking Open on the Play Store or clicking Touch xWallet icon from smartphone’s home screen.
Crypto Wallet Generation 1. Run Touch xWallet App. 2. As App starts, authenticate the device with fingerprint. 3. Select a crypto coin and click ADD button. 4. Wallet key generation and connect to blockchain. 5. Complete wallet generation 6.
Send Cryptocurrency 1. Select a coin wallet to be sent. Send Coin 2. Select SEND button. Send Coin 3. Enter send address, amount, fee and click SEND button. Send Coin Send To : 1hqq 3d5d u5sd QS6H 8H3v zncV 8Zs4 e2oF Ze BTC 0.1000 Success 4. Authenticate and access the Device. Success 5. Verify send and select Yes. 13 6. Approve transaction with fingerprint.
Receive Cryptocurrency 1. Select a coin wallet to be received. 2. Select RECEIVE button. When sharing receiving address, phone’s messenger or SNS App can be used to share the address by QR or text format. When copying receiving address, it can be copied onto a clipboard to be added and shared. 14 3. Verify receiving address and confirm SHARE or Copy.
Description Describes that are commonly used in Crypto currency transactions. • PIN : Bluetooth pairing Number • Address : Cryptocurrency Address. A Bitcoin addresses take HD (Hierarchical Deterministic) Wallet format (e.g. BIP 0032, BIP 0044). Device’s displayed address is Bitcoin’s initial wallet address and mobile App’s displayed address changes each time send/receive occurs as it takes HD(Hierarchical Deterministic) Wallet form.
Firmware Update Touch xWallet consists of Device and App and uses BLE (Bluetooth Low Energy) communication between devices. Firmware update procedure is as follows: ① Install firmware download on PC. (Downloadable at http://www.touchxwallet.com) ② Connect Device and USB cable. ③ Touch Device’s sensor and change to Firmware Mode. ④ Run firmware downloader on PC. ⑤ Click ‘Device check’ from firmware downloader. ⑥ Confirm update version and click ‘Firmware Update.’ ⑦ Progress with firmware update.
Warning Please read this carefully before using the product. • Do not disassemble nor repair the product unauthorized. This voids product warranty. • Keep the product away from heat. Exposure to heat may cause malfunctioning or damage to the product. • Do not use the product in dusty or moisturized environment. • Do not drop nor use excess force when handling the product. Such misuse can damage the product. • Stay away from magnets or magnetic field. Internal data may corrupt or get damaged.
Service Support SCTECHONE Co., Ltd. warrants its products as follows according to Consumer Protection Rights: In any errors during usage, please refer to this manual carefully again and contact us for further technical support for prompt resolution. Technical Support • Office : +82-2-365-3030 (South Korea) • E-mail : support@sctechone.com • Homepage : www.touchxwallet.
Product Contents Touch xWallet Device - 1 USB Cable - 1 Manual and Recovery Sheet – 1 each Product Specification Category Specification Manufacturer SCTECHONE Co., Ltd.
