User Guide

ManualsBrandsScreenBeam ManualsComputers & AccessoriesActiontec 802.11ac Desktop WiFi Extender with 4 Internet Antennas 5GHz, Gigabit Ethernet, Bonded MoCA for Whole Home Fast WiFi (WCB6200Q), Black

802.11ac Wireless

Network Extender

Model # WCB6200Q

Manual Conguration of the Extender’s

Wi-Fi Settings

the Actiontec logo are registered trademarks or trademarks of Actiontec Electronics,

Inc. Incorportated in the U.S. or other countries. All other names are properties of their

respective owners.

Product photo may dier from actual product. However, functionality remains as stated above.

Specications are subject to change without notice.

Quick Start Guide

This Quick Start Guide will walk you through the easy steps to use your

existing coaxial wiring to extend your Wi-Fi signal. This requires that

your Wi-Fi router support MoCA or that you have connected your Wi-Fi

Router to a MoCA Network Adapter similar to Actiontec’s ECB6200

MoCA 2.0 Bonded MoCA Network Adapter. Here is what’s included:

•

(1) WCB6200Q Wireless

Network Extender

•

(1) Power Adapter

(External, 12V DC, 2A

made by Actiontec,

Model# WA-24Q12FU)

•

(1) Ethernet Cable

•

(1) Coaxial Cable

•

(1) Coaxial Splitter

Ste p

1 Use a laptop, tablet or other device to login into your Wi-Fi

Router. (If you do not know how to do this, please see the documentation

for your Wi-Fi Router.)

Ste p

2 Find the list of devices that are connected to your Router. This

is usually found on the main screen after logging into your Router or

under a Status Tab.

Ste p

3 Find a device with the name WCB6200Q. If you cannot nd

a device with that name, please look for a device that has the same Mac

address as the Extender.

Ste p

4 Write down the IP address of the Wi-Fi Network Extender

here: _______________________.

Ste p

5 Open a web browser, and type in the IP address that you

wrote down under Step 4.

Ste p

7 Click on the Wireless Setup icon.

Ste p

8 Select the Wi-Fi band that you want to rename. Make the

adjustments and save your changes.

Ste p

6 Once the Home Screen appears, login into the Extender

with the user name and password found on the label on the back of the

Extender.

Summary of content (2 pages)

PAGE 1
Manual Configuration of the Extender’s Wi-Fi Settings 802.11ac Wireless Network Extender 6 Step Once the Home Screen appears, login into the Extender with the user name and password found on the label on the back of the Extender. 1 Step Use a laptop, tablet or other device to login into your Wi-Fi Router. (If you do not know how to do this, please see the documentation for your Wi-Fi Router.) 2 Step Find the list of devices that are connected to your Router.
PAGE 2
Optional: SYNC the Wi-Fi Settings Note: If another device is using the Coaxial Outlet from Step 2: a) Disconnect the Coaxial Cable from the Wall Outlet. If you would like to use the same Wi-Fi Network Name and Password as your Wi-Fi Router, you can sync them using the WPS buttons on the Router and the Extender. As a result, the Wireless Network Extender will take your router’s current Wi-Fi network name and add “–Ext” for the 2.4 Ghz frequency and “–Ext–5G” for the 5 Ghz frequency.