installationguide ScreenBeam Mini 2 ™ Catalog# SBWD60A This Installation Guide provides step-by-step instructions on how to set up your ScreenBeam Mini 2 Wireless Display Receiver. A. Install the receiver . . . . . . . . . . . . . . . . . . 1 B. Connect your device Windows 8.1 device . . . . . . . . . . . . . . . . . . . . . . 2 Windows 10 device . . . . . . . . . . . . . . . . . . . . . . 4 Miracast™-enabled Android device . . . . .
A. Install the receiver 1. Remove the receiver, power adapter, USB cable, and HDMI extension cable from the box. 2. Plug the small male connector of the USB cable to the receiver’s micro USB port labeled Power. 3. Plug the receiver into an available HDMI port on your HDTV. Note: If the receiver cannot reach the HDMI port on your TV, use the provided HDMI extension cable to connect the receiver. 4.
B. Connect your Windows 8.1 device Windows 8.1 Devices 1. From the Windows desktop, navigate to the Charms menu and select Devices. You can also use the shortcut keys + K. 3. From the Project screen, select Add a wireless display. 2 | screenbeam.com 2. From the Devices menu, click the Project icon.
4. Select your receiver from the list. Note: This is the same receiver name that appears on the Ready to Connect screen on your TV. 5. Enter the PIN as displayed on the TV screen. screenbeam.
B. Connect your Windows 10 device Windows 10 Devices 1. Click the Notifications icon in the bottom-right corner of desktop, and then select Connect to open the wireless display receiver list, or use the shortcut keys + K. Select your receiver from the list. Note: This is the same receiver name that appears on the TV’s Ready to Connect screen. 2. Enter the PIN as displayed on the TV screen. 4 | screenbeam.
B. Connect your Android device Miracast-Enabled Android Devices You can also connect to the receiver from a Miracast-enabled Android device, such as a smartphone, tablet, or gaming console (find the wireless display feature in Settings). Note: The device should be running the latest software for best performance. 1. On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model.
C. Switch display modes When connected with a compatible wireless display application, the receiver supports three display modes (Duplicate, Extend and Second Screen Only). Windows 8.1 Click Charms menu, select Devices, and then Project to launch the display options. Select the desired display mode. You can also use the shortcut keys + P. 6 | screenbeam.
Windows 10 Click the Notifications icon in the bottom-right corner of desktop, and click Project to launch the display options and select the desired display mode. You can also use the shortcut keys + P. screenbeam.
D. Install ScreenBeam Configurator Actiontec’s ScreenBeam Configurator allows users to wirelessly configure and upgrade ScreenBeam Mini 2 receiver. Please go to http://actiontec.zendesk.com and refer to the Configurator user manual for details. 8 | screenbeam.
Visit actiontec.zendesk.com for more information • User Manual • Troubleshooting Tips • FAQs Support: (888) 436-0657 Support email: support@actiontec.zendesk.com P/N 0530-0817-000 © 2017 All rights reserved. Actiontec and the Actiontec logo are registered trademarks, and ScreenBeam is a trademark of Actiontec Electronics, Inc. All other names are properties of their respective owners. Specifications subject to change without notice. 072417 screenbeam.
