User's Manual Part 2

ManualsBrandsScreen Service Broadcasting Technologies ManualsElectronics200 Watt Multimode SDR Transmitter

Screen Service SDT 501 UB-C ARK 1-T General information

May , 2010 v 1.0 Page 1 - 1

SDT 501 UB-C ARK 1-T

Software Defined

Transmitter

OPERATION MANUAL

1 GENERAL INFORMATION

CONTENTS

1.1

SAFETY SUGGESTIONS ...................................................................................................................... 2

1.2

GENERAL SAFETY RECOMMENDATIONS ......................................................................................... 3

1.3

GOOD PRACTICES ............................................................................................................................... 3

1.4

PROCEDURE FOR ESTABLISH THE ABSENCE OF VOLTAGE......................................................... 4

1.4.1

PROCEDURE FOR DETERMINATION OF THE ABSENCE OF VOLTAGE ................................. 4

1.5

FIRST AID IN CASE OF ELECTRICAL SHOCK.................................................................................... 5

1.5.1

EMERGENCY RESUSCITATION TECHNIQUE............................................................................. 5

1.5.2

TREATMENT FOR BURNS ............................................................................................................ 6

1.5.3

ELECTRIC SAFETY PRECAUTIONS............................................................................................. 7

1.5.4

COMPONENTS CONTAINING TOXIC MATERIAL HANDLING PRECAUTION ........................... 7

1.5.5

ELECTROSTATIC PRECAUTIONS................................................................................................ 7

1.6

R&TTE DIRECTIVE 1999/5/EC.............................................................................................................. 8

1.7

WASTE ELECTRICAL AND ELECTONIC EQUIPMENT (WEEE)......................................................... 9

1.8

RADIO LINK SYSTEM SPECIAL ADVISE: EN 50385 STANDARD ...................................................... 9

Summary of content (9 pages)

PAGE 1
Screen Service SDT 501 UB-C ARK 1-T General information SDT 501 UB-C ARK 1-T Software Defined Transmitter OPERATION MANUAL 1 GENERAL INFORMATION CONTENTS SAFETY SUGGESTIONS ...................................................................................................................... 2 1.1 1.2 GENERAL SAFETY RECOMMENDATIONS ......................................................................................... 3 1.3 GOOD PRACTICES ...............................................................
PAGE 2
Screen Service SDT 501 UB-C ARK 1-T General information 1.1 SAFETY SUGGESTIONS Regardless of how well electrical equipment is designed, personnel can be exposed to dangerous electrical shock when protective covers are removed for maintenance or other activities. Therefore, it is incumbent on the user to see that all safety regulations are consistently observed and that each individual assigned to the equipment has a clear understanding of the first aid related to electrical shocks.
PAGE 3
Screen Service SDT 501 UB-C ARK 1-T General information 1.2 GENERAL SAFETY RECOMMENDATIONS When connecting the equipment to the power, please follow these important recommendations: This product is intended to operate from a power source that will not apply more than 10% of the voltage specified on the rear panel between the supply conductors or between either supply conductor and ground.
PAGE 4
Screen Service SDT 501 UB-C ARK 1-T General information 1.4 PROCEDURE FOR ESTABLISH THE ABSENCE OF VOLTAGE Follow these simple steps for establish the absence of voltage: Before starting work on the equipment, it shall be isolated from the mains supply. This disconnection shall always be checked by visual inspection. Further precautions shall be taken to ensure that the mains supp!y cannot be restored whilst work is being carried out.
PAGE 5
Screen Service SDT 501 UB-C ARK 1-T General information 1.5 FIRST AID IN CASE OF ELECTRICAL SHOCK If someone seems unable to free himself while receiving an electric shock, turn power off before rendering aid. A muscular spasm or unconsciousness can make a victim unable to free himself from the electrical power.
PAGE 6
Screen Service SDT 501 UB-C ARK 1-T General information Step 5 Position your hands in the center of the chest between the nipples. Place one hand on top of the other. Step 6 Push down firmly two inches. Push on chest 15 times. CONTINUE WITH TWO BREATHS AND 15 PUMPS UNTIL HELP ARRIVES. 1.5.2 TREATMENT FOR BURNS Continue treat victim for electrical shock. Check for points of entry and exit of current. Cover burned surface with a clean dressing.
PAGE 7
Screen Service SDT 501 UB-C ARK 1-T General information 1.5.3 ELECTRIC SAFETY PRECAUTIONS All the parts making up the equipment have got danger identification tags (with a yellow background) to highlight the parts dangerous for the operator that has access to the system. Presence of hazardous energy levels A hazardous energy level is defined as a stored energy level of 20 J or more, or an available continuous power level of 240 VA or more, at a potential of 2 V or more. 1.5.
PAGE 8
Screen Service SDT 501 UB-C ARK 1-T General information 1.6 R&TTE DIRECTIVE 1999/5/EC Declaration of Conformity with regards to the R&TTE Directive 1999/5/EC English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC Deutsch: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
PAGE 9
Screen Service SDT 501 UB-C ARK 1-T General information 1.7 WASTE ELECTRICAL AND ELECTONIC EQUIPMENT (WEEE) The purpose of the DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE) is, as first priority, the prevention of waste electrical and electronic equipment and, in addition, the reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste.