AMUT05 eSense Flex V2 TAG SPECIFICATIONS [CONFIDENTIAL]
©Copyright SCR Engineers LTD. 2016 This eSense Flex V2 TAG Specification is copyrighted. All rights are reserved and no part of this publication may be reproduced or transmitted in any form or by any means without prior written consent. Disclaimer The information in this manual was accurate and reliable at the time of its release. However, we reserve the right to change the specifications of the product described in this manual without notice at any time.
Version History: 1 2 3 4 5 1 Contents Global system specifications ................................................................................................... 6 1.1 2 System components ........................................................................................................ 6 eSense Flex V2 TAG Specifications .......................................................................................... 6 2.1 2.2 2.3 2.4 2.5 2.
FCC warning: eSense Flex V2 TAG FCC ID: AMUT05 Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Industry Canada Notice: IC: 26436-AMUT05 - This Class B digital apparatus complies with Canadian ICES-003. - Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. This device complies with Industry Canada ICES-003 licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
1 Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for tags powered by internal battery). 1.1 System components eSense Flex V2 TAG – Activity-based tag with 2.4GhZ transceiver. BU-500 – LD Base unit, with RS-485 network interface and 2.4GhZ transceiver. BU-500E – LD Base unit, with 10BASE-T/100BASE-TX Ethernet network interface and 2.4GhZ transceiver.
2.2 2.4GhZ Transceiver Parameters 2.3 TAG – BU/SH communication overview RF Transceiver: Part of SOC SiLabs EFR32FG14P232F256GM32-B RF Frequency: 2.405-2.48GHz Modulation type: QPSK RF Channels: 5MHz separation 16ch Occupied Bandwidth: 2.25MHz Baud Rate: 250Kbps Output power: 4dBm max Antenna type: PCB Omni-directional Antenna gain: Average -6.94dBi (Max gain: -1.
2.
2.6 Block diagram 3 Environmental Conditions 1. IP – required IP67. 2. Operational temperature -33°C to 50°C. 3. Storage – TBD 4. Transportation Complies with ETS 300 019 -2-2 T2.3 Complies with ETS 300 019 -2-1 T 1.2 4 eSense Flex V2 TAG Installation instructions It is important to correctly attach the tags to the cow's ear in a secure manner to avoid them from turning or falling off. To securely attach the tag to the cow’s ear: 1. Ensure that your tag assembly kit includes the following parts: i.
ii.
5 Product marking – Regulatory ID – e-Labeling As product too small we will mark the regulatory ID as required by e-labeling on user operation system as below chart P a g e 11
