SCR AMUT04 eSense - EAR TAG SPECIFICATIONS [CONFIDENTIAL] Zeev K.
Version History: 1 2 Initial version Product name update Contents 1. Global system specifications ................................................................................................... 4 1.1 1.2 2 eSense Ear TAG Specifications................................................................................................. 5 2.1 2.2 2.3 2.4 2.5 3 4 System components ........................................................................................................
eSense EAR TAG FCC ID: AMUT04 Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1. Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for tags which powered by internal battery). 1.1 System components eSense Ear TAG – Activity based tag with 2.4GhZ transceiver. BU-500 – LD Base unit, with RS-485 network interface and 2.4GhZ transceiver. BU-500E – LD Base unit, with 10BASE-T/100BASE-TX Ethernet network interface and 2.4GhZ transceiver. 1.
2 eSense Ear TAG Specifications 2.1 General description eSencse Ear TAG is a unit mounted on animal ear, used for the following: 1. Identification of animal using 2.4GHz transceiver and/or NFC reader unit. 2. Measure various animal parameters, processes and transmit them via 2.4 GHz to the base unit (BU500/E). The tag transmits a 4ms message every few minutes. Outdoor installation, sealed unit, powered from internal 3.6V battery. 2.2 2.
2.
4 eSense Ear TAG Installation instructions It is important to correctly attach the tags to the cow's ear in a secure manner in order to avoid them from turning or falling off. To securely attach the tag to the cow’s ear: 1. Ensure that your tag assembly kit includes the following parts: i. eSense Ear TAG ii.
