SCR AMUT03 HR-TAG-LDn SPECIFICATIONS Zeev K. Ver 0.
Version History: 0.10 0.11 0.12 0.13 Initial version Add NFC Change product name to HR-TAG-LDn Update product name to AMUT03 Contents 1. Global system specifications ................................................................................................... 4 1.1 1.2 2 HR-TAG-LDn Specifications ...................................................................................................... 6 2.1 2.2 2.3 2.4 2.5 2.6 3 4 System components ..................................................
FCC ID: AMUT03 HR-TAG-LDn Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1. Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for tags which powered by internal battery). 1.1 System components HR-TAG-LDn – Activity based tag with 2.4GhZ transceiver & IRDA receiver. IDU530 – Tag identification unit with CAN-Bus network interface, IRDA transmitter & 2.4GhZ Receiver ONLY . IDU510 – Tag identification unit with SCR C.L. network interface, IRDA transmitter & 2.4GhZ Receiver ONLY.
1.
2 HR-TAG-LDn Specifications 2.1 General description Tag is a unit mounted on a collar on the animal neck, used for the following: 1. Identification of animal using 2.4GHz transceiver and optical IRDA receiver and/or NFC reader unit. 2. Measure various animal parameters, processes and transmit them via 2.4 GHz to the base unit (BU500/E) and/or local IDUxx. The tag initiates transmissions of few messages each hour by predefine sequence or upon request from IDUxx via IRDA receiver or BUxx units via 2.
2.
4 Installing the tag It is important to correctly attach the tags to the cow's neck in a secure manner in order to avoid them from turning or falling off. To securely attach the tag to the cow’s neck: 1. Ensure that your tag assembly kit includes the following parts: i. HR-TAG-LDn ii. Belt, Weight & Buckle 2. Open the outside locker of buckle using the buckle opener (supplied with each system) or a large flat screwdriver. 3.