SCR LD Module SPECIFICATIONS [CONFIDENTIAL] Meir D. Version 0.
Version History: 0.10 Initial version Contents 1 Global system specifications ........................................................................................... 4 Target market .................................................................................................................... 4 11 System components ................................................................................................ 4 1.2 TAG/IDU/BU communication overview .............................................
LD Module FCC ID: AMULDBUMODULE Manufacturer: SCR Engineers Ltd. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Wants You to know NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1 Global system specifications All units are for outdoor use, required Radio regulations according to target market & Low voltage 24VDC regulation (except for tags which powered by internal battery). Target market 1.
1.
2 LD Module of BU-500 LD Module FCC ID: AMULDBUMODULE RF Transceiver: Atmel AT86RF230 RF Frequency: 2.4GHz Modulation type: QPSK RF Channels: 16 RF Channels Baud Rate: 250K Bit/Sec (Not configurable) RF Module output power: 3dBm BU-500 (Base Unit) is a unit used to collect messages from tags and send them to central management system. The unit replies to each tag upon receiving a message. They unit is also used to set various tag parameters and to update software inside the tag.
2.2 LD Module Options Option 1: Direct assembly on BU-500 board with connection to antenna by coax cable.
