7 Zone Controller Quick Start Guide
Component List In the Box Gro™ 7 Zone Controller Gro™ 7 Zone Controller Cover Wire Labels Wall Screws × 4 What you will need • iOS or Android Device • Internet service and Wi-Fi router • In-ground irrigation system • Electrical outlet close to the irrigation controller location • Phillips screwdriver Power Supply
Step 1 Label wires on your old controller Keep track of your current zones and label your wires before disconnecting. Use the provided labels: orange for zones, black for common, and gray for pump start relay (if applicable). Note: If your old controller’s power source is hard wired instead of plugging into a power outlet, be sure to turn off the corresponding circuit breaker before disconnecting. Step 2 Remove your old controller Dismount your old sprinkler controller from the wall.
Step 3 Remove Gro™ Controller Cover to expose ports Place fingers inside bottom opening to pull cover apart from base. Step 4 Install Gro™ Controller Mount Gro™ Controller with the four provided screws. Use included wall anchors if necessary.
Step 5 Connect the wires Connect the labeled wires to the corresponding orange ports and the common wire to the black connector port. Next, connect the pump start relay wire to the gray port. Tip: The gray port can be configured in the Gro™ app as Zone 8 if you don’t have a pump start relay. Step 6 Plug in Gro™ Controller Connect the power supply into the Gro™ Controller and plug into an available electrical outlet.
Step 7 Attach Gro™ Controller Cover The indicator light will turn solid green which means the controller is waiting for the internet connection. Step 8 Get the Gro™ Connect app The Gro™ Connect app can be downloaded on the App Store or Google Play. The app will walk you through connecting the Gro™ Controller to your Wi-Fi network, assigning zones, and scheduling options. Online support: mygro.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Welcome to Gro™. The Gro™ ecosystem is a new way for you to manage all things that grow. Gro™ smart devices replace guesswork with data by using sensors, controllers, and pulling weather analytics. Gro™ also offers you more ways to save time and reduce waste with precision watering kits and nutrient delivery systems. All this is pulled together in a family of beautifully simple apps allowing you to control from anywhere. Gro™. Bringing you more joy, fewer chores. © 2017 The Scotts Company LLC.