DJX 100 TT / VINYL ENCODER 10 PROFESSIONAL USB TURNTABLE USER MANUAL www.my-scott.
USER MANUAL Vinyl Encoder 10 SAFETY INSTRUCTIONS 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
UNPACKING THE BOX Before you begin assembly, please be sure all parts and accessories have arrived intact. In order to do so, please use the check list below: * Instruction manual * 45rpm adaptor * RCA cable * Headshell * Slipmat * AC cord * Platter * Counterweight Note: * Do not connect the AC power plug before assembly has been completed. * Before turning the power on, make sure once again that all the connections and power voltage settings are correct.
SET-UP a. Remove the stylus protective cover, if necessary. Never touch the stylus tip during the adjustment. b. Lower the tonearm lever. c. Release the tonearm clamp and release the tonearm from the arm rest. d. Set the anti-skate adjustment to “0”. e. Rotate the counterweight in either direction until the tonearm is perfectly balanced horizontally (floats freely) f. Return the tonearm to the arm rest and lock it in place. g.
CONTROL AND FUNCTIONS 11 1 15 14 13 10 12 2 9 8 3 5 16 4 1. USB PORT USB record only for MP3 format. 19 18 5 6 7 17 2. PLATTER 3. START/STOP BUTTON Press this button to start or stop the platter. 4. PHONO/LINE SWITCH Switch the output to either Phono or Line level. 5. PLATTER SPEEDS Used to select the desired speed. * Press the “33” button to select the 33rpm speed. * Press the “45” button to select the 45rpm speed. 6.
9. S-SHAPED TONEARM 10. TONEARM CLAMP AND REST Use this rest to clamp the tone arm in position during transportation. 11. MOTOR OFF/Reverse BUTTON Press this button to select Reverse/Forward playback. Press the button for more than 1second to switch the motor off, and the LED will be flash. Press the button again for more than 1 second again to switch the motor back on 12. 45 RPM ADAPTOR Place on center spindle for playing 7” records with large center holes. 13.
SPECIFICATIONS TURNTABLE Type Motor Driving method Turntable platter Speeds USB function Wow and flutter S/N ratio Pitch controls Starting Time Braking Time Time for Speed Change 2-speed full manual DC motor Belt drive 330mm diameter, aluminum diecast 33 1/3 and 45 rpm USB REC. Function (only for MP3 format 192 kbps) Less than 0.
