User's Manual

for the installation of bin top adapter, KBT33
The KBT33 adapter is designed to allow the placement of a CME686 or CME810 or
EH222 onto a Scotsman B842 ice storage bin. The adapter is made up of two parts,a
30” wide plastic section and a stainless steel filler plate. Hand tools and a drill will be
required to install this adapter.
The KBT33 contains:
•
One 30” x 24” plastic ice machine support
•
One stainless steel filler plate
•
One insulation pad
•
Two mounting brackets
•
Sheet metal and machine screws
• One tube of RTV sealant
The CME686 or CME810 or EH222 will be placed onto the plastic part of the KBT33,
that part may be positioned either to the left or right end of the B842. The user must
chose which end the ice maker should go on. The factory recommendation is to place
the ice maker on the left end.
Left and Right positions in these instructions are as viewed from the front of the bin.
Instructions
17-2952-01Rev A