User's Manual

ManualsBrandsScotsman ManualsStorageScotsman B842S

for the installation of the bin top kit, KBT29 onto bin B842

Applications: 30” wide cuber, centered or positioned left or

positioned right.

1. Uncrate the bin.

2. Install the legs.

3. Open up KBT29 kit, it will contain two filler plates with insulation attached, one large

filler plate without insulation, one insulation pad, four mounting straps, mounting

hardware and a tube of food grade RTV sealant.

Instructions

Small Filler

Plate

Small Filler

Plate

Mounting

Straps

Large Filler

Plate

RTV Sealant

17-3003-01 Rev A

Summary of content (4 pages)

PAGE 1
Instructions for the installation of the bin top kit, KBT29 onto bin B842 Applications: 30” wide cuber, centered or positioned left or positioned right. 1. Uncrate the bin. 2. Install the legs. 3. Open up KBT29 kit, it will contain two filler plates with insulation attached, one large filler plate without insulation, one insulation pad, four mounting straps, mounting hardware and a tube of food grade RTV sealant.
PAGE 2
Centered Ice Machine: a. Place a filler plate on each end of the bin b. Secure each at the back with one 5/16” bolt from the kit. c. Drill three 1/8” dia holes thru the bin’s outside panel using the holes in the flange of each filler plate as a template. Do NOT drill beyond the outside panel. d. Attach the side of each filler plate to the bin with three #8 sheet metal screws from the kit. e. Place ice machine centered between the two filler plates. f.
PAGE 3
Ice Machine Positioned Left a. Place gasket pad on bottom of large filler plate, be sure gasket pad is to the left end of the plate. See last page of these instructions. b. Place ice machine onto bin all the way to the left edge. c. Place filler plate onto bin next to the ice machine. d. Secure at the back with one 5/16” bolt from the kit. e. Drill three 1/8” dia holes thru the bin’s outside panel using the holes in the flange of each filler plate as a template. Do NOT drill beyond the outside panel. f.
PAGE 4
Side View of Filler Plate Insulation Material Line Up Insulation With Side Flange Position Insulation Here If Filler Plate Will Be On The Right End Of The Bin Bottom View of Filler Plate Position Insulation Here If Filler Plate Will Be On The Left End Of The Bin Insulation Material Filler Plate and Insulation Pad Diagram