User's Manual

ManualsBrandsScosche Industries ManualsElectronicsIPOD?Bluetooth - Mobile Tx & Rx Car Kit

IPOD / BLUETOOTH®

MOBILE TRANSMITTER & RECEIVER CAR KIT

Congratulations on your new Scosche Bluetooth® iPod mobile transmitter & receiver car kit!

This kit allows your iPod to play through your aftermarket stereo system using Bluetooth®

wireless digital audio streaming technology.

FEATURES

Features:

● Easy connection and setup with ● Digital streaming audio transmission

“Auto” pairing

● Bluetooth® 1.2 compliant ● Can be paired with multiple receivers

● Universal dash mounting clip included ● Rechargeable audio transmitter with

3.5mm input jack

● Up to 15 hours of battery life ● 12 Volt car charger/adapter included

PART LIST

● (1) Bluetooth® Transmitter ● (1) Receiver Power Plug/Cable

● (1) Bluetooth® Receiver ● (1) Universal Dash Mounting Clip

● (1) iPod Mini 4/6G Holster ● (1) 12V iPod/Transmitter Charger-Adapter

● (1) iPod 40/60G/Photo Holster ● (2) Extra Long Cable Zip Ties

● (1) iPod 10/20/30G Holster ● (2) Adhesive Hook & Loop strips

SYSTEM REQUIREMENTS

● Apple iPod Media Player: Gen3/Gen4, Mini4G/6G or Photo Player (Not included)

● Aftermarket Car Stereo with Auxiliary input feature (See note below)

NOTE: Your aftermarket stereo must have an available RCA input function. The optional

Scosche adapters available to convert CD changer inputs into a pair of Auxiliary Audio inputs,

are listed below.

SCOSCHE CD CHANGER AUXILIARY INPUT ADAPTERS:

Part# Description

DCAXAALPAI Alpine AI Net CD Changer Compatible units

DCAXAALPM8 Alpine M Bus (8-Pin) CD Changer Compatible units

DCAXKEN13 Kenwood (13 Pin) CD Changer Compatible units

DCAXAPIO11 Pioneer P bus (11 Pin) CD Changer Compatible units

TECH SUPPORT

If you have any further questions, call our TOLL-FREE Technical HELP line:

1-800-621-3695 x3

IPBC

INSTALLING THE BLUETOOTH® RECEIVER

LOCATION:

Choosing a proper location for your Bluetooth® receiver unit will have the greatest overall

effect on the performance of this system. We recommend an area at the rear of the stereo,

above the stereo or in the glove box. Locations higher in the dash will provide better

operation. Mounting the receiver low in the dash or behind large metal obstructions may

cause signal break-up and reduced range. Once installed, switched on, and level-matched,

the receiver unit does not require further access by the user.

RECEIVER PANELS (FIG.1)

PWR

OUTPUT

LEVEL

OUTPUT

MIC

ON/OFF

LOCK

REMOVE

Power Connection

(Insert, twist powe

cable to lock in place)

Output Level Control

(Allows level-matching

to existing Stereo/CD

sources)

RCA Audio Outputs

(Connect to Aux input

of car stereo)

Microphone input

(Not used. For future

expansion.)

Power Switch Blue Power LED

Summary of content (4 pages)

PAGE 1
IPBCK IPOD / BLUETOOTH® MOBILE TRANSMITTER & RECEIVER CAR KIT Congratulations on your new Scosche Bluetooth® iPod mobile transmitter & receiver car kit! This kit allows your iPod to play through your aftermarket stereo system using Bluetooth® wireless digital audio streaming technology. INSTALLING THE BLUETOOTH® RECEIVER LOCATION: Choosing a proper location for your Bluetooth® receiver unit will have the greatest overall effect on the performance of this system.
PAGE 2
INSTALLING THE BLUETOOTH® RECEIVER INSTALLING THE BLUETOOTH® RECEIVER 1. Disconnect negative battery terminal. Remove aftermarket stereo. 2. Connect the Black/White wire (marked with “+”) fused power lead to the “Amp Remote Lead” (amplifier control) wire on the back of the aftermarket stereo. The amp remote wire is usually Blue/white. Consult the owner’s manual of your stereo for further information. If no “Amp Remote Lead” wire is available, then use a switched +12V power source.
PAGE 3
E-Z TRANSMITTER SETUP E-Z TRANSMITTER SETUP NOTE: The Bluetooth® wireless transmitter is designed for use inside and within CLOSE proximity of your vehicle. Range will vary depending on many factors including the size of the vehicle, placement of the receiver, and pre-existing or RF interference. 3. Plug in the 12V Car Charger into your vehicle’s Lighter/Power receptacle. (Fig. 7) 4. Attach the iPod and Bluetooth® Transmitter charger plugs. (Fig. 7) CAR ADAPTER/DUAL CHARGER (FIG.
PAGE 4
POWER UP & AUTO PAIRING Pairing creates a link between devices with Bluetooth® technology and allows the transmitter to remember the receiver’s unique ID. Your iPod transmitter and receiver will automatically pair up the first time both devices are powered. 1. Press the power button on the side of the transmitter to turn on the unit. 2. The BLUE LED will flash quickly when the two devices are pairing. Once the transmitter and receiver are linked, the LED becomes solid.