Wiring Diagram

SQR14101WHW

Wiring Diagram:

WARNINGS AND CAUTIONS

WIFI SWITCH SINGLE POLE

To replace the face

cover, just use a

flat screwdriver to

pry-off the

interchangeable plate.

Please Note:

SE Wiser Smart App Control

The SQR14101WHW ON/OFF Switch is a perfect wireless manual and remote on/off

ballast and so on. This SQR14101WHW ON/OFF Switch works with WF3K 3-Way

SQR14101WHW

5. Connect this SQR14101WHW switch as shown in the wiring diagram: Black

lead

7. Insert the SQR14101WHW switch into the standard outlet box carefully.

8. Make sure the SQR14101WHW switch to the box using the supplied screws.

Manual Control

The switch paddle on the SQR14101WHW allows the user to:

After a power failure, the SQR14101WHW on/off switch

returns to OFF state.

3-Way Wiring Schematic using one SQR14101WHW and one WF3K

SQR14101WHW

Can be used for single pole or 3-Way (Multi-location) with WF3K Auxiliary Switch

(sold separately)

Traveler works with WF3K for 3-way control, WF3K sold separately.

PAGE 1
SQR14101WHW WIFI SWITCH SINGLE POLE 5. Connect this SQR14101WHW switch as shown in the wiring diagram: Black lead SQR14101WHW 7. Insert the SQR14101WHW switch into the standard outlet box carefully. 8. Make sure the SQR14101WHW switch to the box using the supplied screws. 3-Way Wiring Schematic using one SQR14101WHW and one WF3K To replace the face cover, just use a flat screwdriver to pry-off the interchangeable plate.
PAGE 2
Federal Communication Commission Interference Statement 3. When the device fail to add in the App, please try to enter the AP mode. Before enter the AP mode please press the top or bottom button 5 times continuously, then press and hold at the sixth for 5 seconds then release, or press and hold the Rest button with a ball point 3 seconds then release. the LED indicator in green and slowly blinks. FCC Caution: This device complies with part 15 of the FCC Rules.
PAGE 3
Ce dispositif est conforme à la limite d 'exposition aux rayonnements ised - RSS - 102 prescrite pour un environnement non contrôlé.Lors de l 'installation et de l' exploitation de ce dispositif, la distance minimale entre le radiateur et toute partie du corps doit être de 20 cm. FCC Supplier’s Declaration of Conformity Model number：SQR14101WHW This device complies with part 15 of the FCC Rules.