Operation Manual Models SK118L-B, SK118R-B, SK118R-BS, SK118L-BS, SK118R-SS, SK118L-SS, SK190-B, SK190-BS and SK190-SS 1|Page
Contents: 1. General information ................................................................ 3 2. Technical data ........................................................................ 5 3. Installation .............................................................................. 6 4. Maintenance ........................................................................... 7 5. Trouble shooting ..................................................................... 7 6. Warranty …………………………………………………………..
1. GENERAL INFORMATION 1.1 FOREWORD The purpose of this document is to provide important information regarding the installation, use and maintenance of the cooler. Before any operation, you should read carefully the information contained in this manual. The manufacturer assumes no liability for parts or labour coverage for component failure or other damages resulting from improper usage, installation or failure to clean and / or maintain product as set forth in these instructions. 1.
1.2.2 WARNINGS CONTINUED Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. Do not Store explosive substances such as aerosol cans with a flammable propellant in this appliance. Don’t store flammable liquids near unit that may omit vapour. Unplug unit when not in use and also when maintenance and cleaning is taking place.
1.3 CONTROLLER SETTINGS 1.4 RESPONSIBILITY OF THE CUSTOMER Ensure that the electrical outlet is connected effectively to earth (ground), suitable to provide the voltage indicated on the data plate. Make sure that the cooler is placed on a level surface. 2. TECHNICAL DATA 2.1 MATERIALS AND REFRIGERANTS Interior or exterior surfaces that come into contact with the product are made of steel, aluminium or non-toxic plastic materials. The refrigerant used is approved by government regulations.
3. INSTALLATION For safe proper operation, follow the manufacturers instructions reported in this section. 3.1 POSITIONING IMPORTANT NOTE: Coolers that have been tilted MUST remain in the upright position for 24 hours prior to plugging in the cooler, the cooler is built in style so can go under benches, front grill must be clear. Keep away from heat sources, such as radiators or air conditioning pipes. Allow free air circulation to the refrigerator unit if you have option, this can help lessen run times.
4. MAINTENANCE - Before cleaning the cooler always remember to unplug it. - Unplug the cooler at the electrical outlet; never pull the service cord. - Do not use sharp objects for cleaning. - Clean the inside cabinet of cooler with a clean damp cloth or with neutral soap. Avoid damage by never using abrasive or flammable cleaning products. - Clean the condenser every 6 – 12 months with a vacuum cleaner or a brush to eliminate the dust accumulation.
5. TROUBLE SHOOTING CONTINUED c) The appliance is excessively noisy. -Verify the equipment is level. -Ensure that the equipment is not touching other equipment that could cause vibration, like piping touching metal cover or other parts. -If fan is causing noise it may be faulty bearing 6.
|Page
| P a g e