User Manual

AD-Series Reader Replacement
AD-Series Reader Replacement
AD-Series Reader Replacement
Installation InstructionsInstrucciones de instalación Notice d'installation
Cylindrical or Mortise
Cylindrical or Mortise
Cylindrical or Mortise
a
b
c
If installing reader on WPR400, see the user guide for reader installation instructions.
If installing reader on WPR400, see the user guide for reader installation instructions.
If installing reader on WPR400, see the user guide for reader installation instructions.
1. Find drawing of lock type (Cylindrical, Mortise, or Exit Device).
2. Remove existing reader as shown.
3. Install new reader.
4. Reassemble in reverse order.
1. Find drawing of lock type (Cylindrical, Mortise, or Exit Device).
2. Remove existing reader as shown.
3. Install new reader.
4. Reassemble in reverse order.
1. Find drawing of lock type (Cylindrical, Mortise, or Exit Device).
2. Remove existing reader as shown.
3. Install new reader.
4. Reassemble in reverse order.
P516-106
©2009 Schlage Lock Company
[phone]
Printed in Country
P516-106-a-6 Rev. 12/09
a
b
d
e
f
g
h
Reader
Reader
Reader
Exit Device
Exit Device
Exit Device
Reader
Reader
Reader
c
NoteNote
Note