BB-29193 BOOMBOX RADIO CD MP3 USER MANUAL Please read and keep these instructions
Important safety instructions – please read carefully and keep for future reference To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product. In case of product failure, only qualified personnel can repair. There are no user-serviceable parts inside.
- This product is intended to be used under temperate climate and should not be used under tropical climate. If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid any danger. This product must be connected to an electrical supply 230V ~ 50Hz. The plug must be accessible after installation.
PRODUCT PRESENTATION 1. SPEAKER 2. PROGRAM BUTTON 3. PLAY MODE BUTTON 4. CD SKIP BACK BUTTON 5. CD DOOR 6. LCD DISPLAY 7. CD SKIP AHEAD BUTTON 8. STOP/FOLDER BUTTON 9. CC PLAY/PAUSE BUTTON 10. HANDLE 11. FM ANTENNA 12. AC INPUT SOCKET 13.POWER ON/OFF SWITCH 14. RADIO STATION TUNNING KNOB 15. FUNCTION SWITCH AM/FM/AUX/CD.MP3 16. VOLUME BUTTON 17.
INITIAL INSTALLATION BATTERY INSTALLATION 1. Open the battery compartment cover. 2. Insert 6 pcs. X LR14 type batteries into battery compartment. Be sure to insert batteries polarity correctly. 3. Close the battery compartment cover. 4. The unit is now ready for operation. NOTE: 1. The battery can be disconnected automatically when the AC cord is inserted to the AC INPUT socket when operated by AC. 2. Remove all the batteries from battery compartment in case of prolonged nonuse. 3.
CD MODE: -REPEAT > REPEAT ALL > RANDOM > NORMAL MP3 MODE: -REPEAT > REPEAT ALBUM > REPEAT ALL > RANDOM > NORMAL FORWARD/REVERSE SKIP 1. Press button to skip ahead to the beginning of the next track. Press this button again for each additional track you want to skip. 2. Press button to skip back to beginning of the current track. Press this button again for each additional track you want to skip PROGRAMMING THE CD PLAYER You can program up to 20 titles in arbitrary sequence.
The telescopic antenna on the top of the unit is for FM reception only. If reception is weak, adjust the length and the angle of the antenna. TO LISTEN TO A RADIO STATION 1. Set FUNCTION selector to FM/AM position. 2. Tune a desired station by tuning the TUNING KNOB. 3. Adjust VOLUME control to suit your personal listening preference. 4. To switch the radio off, set the FUNCTION SELECTOR to OFF position. MAINTENANCE Notes on CDs 1. Before playing, clean the CD with a cleaning cloth.
TROUBLESHOOTING GUIDE When the instructions in this manual are followed, this unit should function properly. However, if any of the following difficulties occur and cannot be corrected by the user or if a problem arises that is not mentioned here, please contact Customer Service or a qualified service technician. 1. Unit Does Not Play • Unit may be disconnected from power source (No AC connection or batteries). Check connection. • Disc is not correctly set. CDs should be inserted label side up.
TECHNICAL SPECIFICATIONS Power requirement: AC 230V ~ 50Hz ; 15 Watts Dimension unit : 264 mm (W) x 174 mm (D) x 90mm (L) RECEIVER SECTION Receiving bands: AM/FM FM Tuning range / Sensitivity: AM 540 -1600kHz FM 88 - 108 MHz * Specifications and features are subject to change without prior notice.