Certificate

safety for electronic systems
Schaffner EMV AG Components Safety Service
Nordstrasse 11 CH-4542 Luterbach
T [phone] F [phone] www.schaffner.com
File: DoC (FN 20xx-series).doc
Created: March 10, 2004 - WF
Last change: March 29, 2006 - WF
page 1 / 1
Accredited according to ISO/IEC 17025
by the Swiss Federal Office of Metrology and
Accreditation
Registration number STS 015
MANUFACTURERS DECLARATION OF CONFORMANCE
Schaffner EMV AG confirms that the products listed in Table 1 conform to the principles of
the Low Voltage Directive 73/23/EEC when used within the products specified operating
current, voltage and temperature. All listed products are designed and manufactured under
a quality system which conforms to the requirements of ISO 9001: 2000.
The conditions used as a basis for this declaration are listed in Table 2.
Table 1: Products covered by this Declaration
FN 2010...-series
FN 2020...-series
FN 2030...-series
FN 2060...-series
FN 2070...-series
FN 2080...-series
FN 2090...-series
Table 2: Technical standards used as a Basis for this Declaration
EN 133'200 (1999) Passive filter units for electromagnetic interference
suppression
IEC 60'939 1+2 (1988) Complete Filter Units for Radio Interference
Suppression
UL1283 (1998) Electromagnetic Interference Filters
CSA: C22.2 No. 8-M1986 Electromagnetic Interference (EMI) Filters
Passive Flammability according to UL 94: better or at least V-2
Components Safety Service
Willi Furer
CH-4542 Luterbach, March 29, 2006