Dear Valued Customer, Congratulations on your new Sound Bar 2.1 with built-in subwoofer purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your Sound Bar, please read the manual carefully before making any adjustments, and keep them in a safe place for future references. The Sound Bar 2.1 is a versatile speaker unit with both digital and analog audio inputs for audio visual sources.
Table of Contents TABLE OF CONTENTS 2 SAFETY INFORMATION 3 SAFETY INSTRUCTIONS 4 PACKAGE CONTENTS 6 OVERVIEWS 6 FRONT & BACK 6 SOUND BAR REMOTE & EXTRAS 7 MOUNTING THE SOUND BAR 9 INSTALLING BATTERIES TO THE REMOTE CONTROL 11 CONNECTION SUGGESTIONS 12 IF YOU HAVE DIGITAL AUDIO WITH YOUR TV 12 IF YOU HAVE ANALOG AUDIO WITH YOUR TV 13 IF YOU HAVE AN AUDIO DEVICE WITH YOUR TV 14 OPERATION 15 HOW DO I CLEAN THE SOUND BAR? 16 TROUBLESHOOTING 17 CALL US IF YOU NEED HELP! 18 SPECIFICATION 19 LIMITED PRODUCT WARRA
SAFETY INFORMATION Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the Sound Bar. Keep these instructions in a safe place for future reference.
this case may result in fire or electric shock. Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself. Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Package Contents Sound Bar x 1 User Manual x 1 Warranty Card x 1 Drywall Anchor with Screw x 2 Sets 3 Head RCA Audio Cable x 1 3.5 mm Mini-jack Cable x 1 Sound Bar Remote Control with lithium CR2025 battery x 1 Overviews Front & Back 1. 2. 3. 4. 5. WALL MOUNT BRACKETS – Use these brackets to hang the sound bar on a wall. POWER CABLE – Connect this to a surge protector or wall outlet. COAXIAL SPDIF – Connect your digital audio outputs to this connection for audio.
Sound Bar Remote & Extras This remote uses a lithium CR2025 battery. 1. POWER – Turns the Sound Bar on or off. 2. VOLUME (–) – Press this button to decrease the volume. 3. MOVIE – Press this button to switch to the MOVIE sound mode. 4. NEWS – Press this button to switch to the NEWS sound mode. 5. AUX – Press this button to switch to the analog audio source AUX. 6. DIM – Press this button to dim the display on the sound bar. 7. LINE – Press this button to switch to the analog source LINE. 8.
Some Sceptre HDTV remotes might also have buttons used to control the sound bar. If you see Power, Source, Mode, Vol (+/-) buttons encircled with the SOUNDBAR word next to it, you can use them to control the Sound Bar. 1. 2. 3. 4. 5. POWER – This button turns on or off the Sound Bar. SOURCE – This button changes the sound source on the Sound Bar between COAX and AUX. MODE – This button changes the sound mode on the Sound Bar. VOL(-) – This button decreases the volume on the Sound Bar.
Mounting the Sound Bar To mount the Sound Bar you need to have 520 mm of horizontal space on the wall. 1. 2. 3. 4. 5. Measure the length of 520mm on the wall. With a pencil mark the two entry points where you are going to install the dry wall anchors and puncture the points with a nail so it is easier for the anchor to be screwed in. With a #2 Phillips screw driver press the anchor tip slightly into the point marked previously on the drywall.
6. Align the mounting brackets on the back of the sound bar to the two screws protruding on the wall and fit into them, then finally slowly lower the sound bar so that it securely hangs onto the screws. - 10 www.SCEPTRE.com Sound Bar 2.
Installing Batteries to the Remote Control Please insert one CR2025 lithium battery into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards, re-attach the battery cover. Please note: Only use CR2025 lithium batteries. Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.
Connection Suggestions If you have digital audio with your TV 1. 2. 3. 4. 5. 6. Grab the included 3 head RCA audio cable and use the black colored RCA plug. Find the SPDIF digital audio coax connection on the back of the TV and connect one end of the cable to it. Connect the other end of the cable to the back of the Sound Bar’s black coax connection. Turn on the TV, make sure you output PCM signal to the Sound Bar. Turn on the Sound Bar and press the COAX button on the Sound Bar’s remote.
If you have analog audio with your TV 1. 2. 3. 4. 5. 6. Grab the included 3 head RCA audio cable and use the red and white colored RCA plug. Find the analog audio out on the back of the TV and connect one end of the cable to it matching the colors red to red, and white to white. Connect the other end of the cable to the back of the Sound Bar’s AUX red and white connection. Turn on the TV, and the Sound Bar. Press the AUX button on the Sound Bar’s remote. Enjoy the Sound Bar! - 13 www.SCEPTRE.
If you have an audio device with your TV 1. 2. 3. 4. 5. 6. Grab the included 3.5mm mini-jack cable. Find the headphone jack connection on the audio device and connect one end of the cable to it. Connect the other end of the cable to the back of the Sound Bar’s LINE IN connection. Turn on the audio device. Turn on the Sound Bar and press the LINE button on the Sound Bar’s remote. Enjoy your Sound Bar! - 14 www.SCEPTRE.com Sound Bar 2.
Operation TO SWITCH ON / OFF THE UNIT 1. 2. Press the POWER button on the front panel or the RED button on the remote control to turn on the unit. If the unit is ON you will see the display window show the source selected, volume level and sound mode. Press the POWER button on the front panel or the RED button on the remote control again to turn off the unit. SELECTING A SOURCE 1. Press the SOURCE button on the control panel repeatedly to switch between sources.
How do I clean the Sound Bar? IMPORTANT 1. 2. The power cable has to be removed from the socket before cleaning the Sound Bar. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the Sound Bar. These types of chemicals might damage the housing . Cleaning the bezel and remote control 1. 2. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions NO SOUND REMOTE DOES NOT WORK NO POWER Speaker buzzing or humming Try increasing the volume of the speaker. Check that the Sound Bar is not turned off. Check the Sound Bar volume level. Make sure the correct input is selected. Make sure the proper cables are connected.
Call Us If You Need Help! Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below. For technical help, contact our Technical Support Group via email or phone.
Specification Speaker(s) x Diameter (inch) Speaker type Full range Speaker Rated Impedance Frequency Response (Hz) Sound Pressure Level (dB) Output Power (Watt) Subwoofer x Diameter (inch) Bonus Subwoofer Sound Bar Spec Connection Rated Impedance Frequency Response (Hz) Output Power (Watt) Connectivity Technology Analog Audio Input Digital Audio Input Power Input Range Power Preset EQ SRS WOW HDTM Features Preset EQ Sound Bar 2.
Subwoofer 35W with Passive Radiator Subwoofer Level Sleep LED Dimmer Mute Design Touch Sensory Control Connection ports Easy installation Certifications Compliances RoHS General Dimension Weight Warranty Contemporary buttons with the slightest touch of your finger Adding flexibly with connecting multiple audio devices Table top or wall-mountable. Light Weight design. 1 × SB301524 2.1 Sound Bar 1 × 3 head RCA Audio Cable 1 × 3.
LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended Service warranty. SCEPTRE’s Responsibility SCEPTRE units purchased from an authorized SCEPTRE U.S.
and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the Sound Bar are not covered by this warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added Feature” are not covered by this warranty or Sceptre, Inc.
Disclaimer, Trademarks, & Copyright Information SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. is a trademark of SRS Labs, Inc. In the interest of continuing product improvement, Sceptre, Inc.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.