284mm 213mm 8144021020009C
SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
SAFETY INSTRUCTIONS Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: 1. Use only cabinets or stands recommended by the manufacturer of the display set. 2. Use only furniture that can safely support the display set. 3. Make sure the display set is not overhanging the edge of the supporting furniture. 4.
IMPORTANT INFORMATION -3www.SCEPTRE.
IMPORTANT INFORMATION Dispose unwanted electronics and batteries through an approved recycler. For display please visit the web at http://www.earth911.com/recyclingguide/how-to-recycle-large-electronics/ For Batteries please visit the web at http://www.call2recycle.org/ The double square is to identify equipment meeting the safety requirements specified for Class II equipment according to IEC 604175172.
SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer. The display is equipped with a twopronged plug. Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near the equipment and should be easily accessible. Only the marked power source can be used for the product.
Dear Sceptre Customer, Congratulations on your new SCEPTRE E24 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at SceptreTS@SCEPTRE.com.
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding.
Attaching the Base 1. Lay the display down and attach the base. 2. Screw in the 2 screws as indicated to secure the installation. -9www.SCEPTRE.
Removing the Base 1. To remove the stand, lay the display with the screen portion facing down. Look at the back of the monitor and pull open the plastic cover on the neck from the left side. 2. Unscrew the 2 screws and you can take apart the stand. - 10 www.SCEPTRE.
Table of Contents SAFETY INSTRUCTIONS..............................................................................................1 SAFETY INSTRUCTIONS............................................................................................. 2 IMPORTANT INFORMATION....................................................................................... 3 IMPORTANT INFORMATION....................................................................................... 4 SAFETY INSTRUCTIONS......................
Identifying Front and Rear Panel Front View Rear View Mounting Pattern Mounting Specification: 100mm using screw size M4 x 2 Length of screw should not exceed 5mm. Please Note: The 10mm length of screw refers to how deep the screw can go inside the mounting holes. When you’re buying screws, you should add the original 10mm to the thickness of your mounting plate in order to get the total screw length. - 12 www.SCEPTRE.
Rear Control Buttons 1. 2. 3. 4. 5. – This button activates the On Screen Display (OSD). While the OSD is active, this button will act as the select button to open up an option for adjustment. ▲ – This button moves the selection up while the OSD is active. This button will also increase the value of an adjustment while an option is open. ▼ – This button moves the selection down while the OSD is active. This button will also decrease the value of an adjustment while an option is open.
Rear View Connections 1. 2. 3. 4. 5. POWER – This plug is responsible for providing power to the monitor. Use it with the included AC adapter. AUDIO OUT (3.5mm Mini-jack) – This connection is for audio out from the monitor to multimedia speakers or headphones. AUDIO IN (3.5mm Mini-jack) – This connection is for audio in from the computer going into the monitor. VGA – VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal.
Connections If You have VGA Connection on Your Video Card… 1. 2. 3. 4. Make sure the power of E24 LED MONITOR is turned off. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the E24 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the PROPERTIES option. Click on the SETTINGS tab.
If You have HDMI Connection on Your Cable or Satellite Box… 1. Make sure the power of the E24 LED MONITOR is turned off. 2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the cable or satellite box. 3. Turn on the power of both the E24 LED MONITOR and the cable or satellite box. Please Note: Make sure to set audio output from your cable or satellite box to PCM output. Please refer to the cable or satellite company for more information. - 16 www.
On Screen Display (OSD) Menu The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast, and backlight etc. When you press the button on the monitor, the OSD screen will appear. Select each of the functions with the ▲ or ▼ buttons. Use the button again to enter each of the function or when you’re in the function already, use the button to select the option you want to adjust. Use the ▲ or ▼ buttons to adjust each option’s values.
LUMINANCE This function adjusts the brightness and contrast of the LCD. 1. 2. 3. 4. 5. To use this function, press to open the OSD then highlight LUMINANCE function by pressing the ▲ or ▼ button. Press again to enter the function. Press ▲ or ▼ button to select BRIGHTNESS or CONTRAST to adjust. Press to select the option you want to adjust. Use the ▲ or ▼ button to adjust the values. a. BRIGHTNESS – This option adjusts the black level in a picture.
IMAGE This function adjusts the image quality of the monitor. 1. 2. 3. 4. Press to open the OSD then highlight IMAGE by pressing the ▲ or ▼ buttons. Press to enter the function. Press the ▲ or ▼ buttons to select the option you want to adjust and press to enter the option. Use the ▲ or ▼ buttons to adjust the values. a. H. POSITION – This option adjusts the horizontal position of the image. b. V. POISTION – This option adjusts the vertical position of the image. c.
COLOR TEMP. This function adjusts the overall balance of white colors in a picture in large increments. Color temperature consists of COOL, NORMAL, WARM, and USER COLOR. 1. 2. 3. 4. 5. To use this function, press to open the OSD then highlight COLOR TEMP function by pressing the ▲ or ▼ button. Press again to enter the function. Press ▲ or ▼ button to select the option you want. Press to finalize your selection. If you have selected USER on the COLOR TEMP.
OSD SETTINGS This function allows you to change the language of the OSD and adjust the OSD options. 1. 2. 3. Press to open the OSD then highlight OSD SETTINGS by pressing the ▲ or ▼ buttons. Press to enter the function. Press the ▲ or ▼ buttons to select the option you want to change to and press to begin adjusting the option a. LANGUAGE – This option selects various languages for the OSD. b. OSD H. POSITION – This option changes the horizontal position of the OSD. c. OSD V.
RESET This function resets the monitor’s settings. 1. 2. 3. Press to open the OSD then highlight RESET by pressing the ▲ or ▼ buttons. Press to enter the function. Press the ▲ or ▼ buttons to select the option you want to use. a. IMAGE AUTO ADJUST – This option automatically adjusts the image clarity while under the input VGA. b. COLOR AUTO ADJUST – This option automatically balances the image color balance while under the input VGA. c. RESET – This option reset all settings under the OSD.
OTHER This function changes various miscellaneous options. 1. 2. 3. Press to open the OSD then highlight OTHER by pressing the ▲ or ▼ buttons. Press to enter the function. Press the ▲ or ▼ buttons to select the option you want to change to and press the button to begin adjusting the option a. SIGNAL SOURCE – This option lets users change the source of their video. - 23 www.SCEPTRE.
Supported PC (VGA) Resolution RESOLUTION & REFRESH RATE 1920 x 1080 @ 60Hz 1680 x 1050 @ 60Hz 1280 x 1024 @ 60Hz 800 x 600 @ 60Hz 640 x 480 @ 60Hz Supported Video (HDMI) Resolution VIDEO RESOLUTION 480p 720p 1080i 1080p *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice. - 24 www.SCEPTRE.
Troubleshooting Problem DISPLAY IS UNCLEAR AND UNSTABLE THERE IS NO LED DISPLAY or SCREEN SAYS NO SIGNAL MONITOR SAYS “SIGNAL OUT OF RANGE” I CAN’T OPEN THE OSD Possible solutions To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 x 1080 at 60Hz, then AUTO ADJUST. Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt.
Problem I CANNOT GET THE RESOLUTION 1920 x1080 Possible solutions If you are using HDMI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card’s HDMI cannot support widescreen resolutions. Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want. Rebooting your computer will solve the situation.
Problem THE WORDS ARE TOO SMALL AT 1920 x1080 Possible solutions At the native resolution of 1920 x1080, some people might feel that the words are too small to read. You can change the size of the words in Windows Operating System via its display properties. For Windows XP 1. Right click on the background with nothing selected. Left click on the PROPERTIES option. 2. Click on the SETTINGS tab. 3. Under SETTINGS, click on the ADVANCED button. 4.
How do I clean the LED Monitor? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the display. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the display. These types of chemicals might damage the housing and the LCD glass. Cleaning the bezel 1. Use a 100% cotton cloth or micro-fiber cloth for cleaning. 2. If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again.
Specification Display panel Active Area / Screen Size 24” (diagonal 23.8“) Aspect Ratio Widescreen 16 : 9 Resolution Brightness Native: 1920 x1080 230 cd/m2 Dynamic Contrast 5000:1 Response Time 5ms Viewing Angle Typical 178/178 Degree (Horizontal/Vertical) Colors 16.7M color LED Backlight 50,000+ hours Monitor Display Dimension With Stand: 21.45” x 15.70” x 6.57” Without Stand: 21.45” x 12.52” x 1.14” Weight 5.77 lb (with stand), 5.
LIMITED PRODUCT WARRANTY Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended Service warranty. SCEPTRE’s Responsibility SCEPTRE units purchased from an authorized SCEPTRE U.S.
not covered by this warranty. Installation, removal, transportation and reinstallation of a display and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the display are not covered by this warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added Feature” are not covered by this warranty or Sceptre, Inc.
Disclaimer, Trademarks, Icons & Copyright Information “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.” This Display meets the ENERGY STAR® guidelines under the default picture settings. Changing this setting or enabling other options will increase power consumption which could possibly exceed the guidelines of ENERGY STAR®. For more information on the ENERGY STAR program, please refer to www.energystar.gov.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
