User's Manual

ManualsBrandsScanreco ManualsElectronics2.4 GHz Transceiver

TR05

U s e r m a n u a l

D e v e l o p e d f o r d e m an d i n g e n v i r o n me n t s

Scanreco´s TR05 is built and designed for the toughest and most

demanding of environments. Scanreco can hereby offer the market of crane and

machine operators an extremely easy to use radio remote control retaining

speed, precision, and control with the maximum of safety.

Behind the development of the radio transeivers lies the idea

of providing a product with a high degree of reliability, user-friendliness,

and easy upgrade for cable systems or other data radio applications.

The product family includes different transeivers and

receivers offering a variety of choice depending on the area of use. These products

are based on a modular architecture, which makes them extremely flexible

to customize and adapt according to the customer’s needs.

The products – which are in high demand – are mainly mounted on cranes

and mobile machines. Our customers are some of the world’s largest and most

challenging crane and machinery manufacturers. Thousands of cranes and

machines containing Scanreco’s radio products are in use worldwide.

Our products are deployed everywhere, from truck cranes laying heating

pipes in Stockholm to lifting oil pipelines in Russia and setting in place concrete

sections in Singapore.



 

TR05

The radio module is designed for use in Scanreco industrial remote controls only that are permanently installed to

provide a separation distance of at least 20 cm from the user and in hand-held / hand-operated remote control devices.

This module is not for resale to the general public, installers, OEM integrators.

This module is designed for use in Scanreco products only and is installed by or under the control of Scanreco.

Summary of content (4 pages)

PAGE 1
TR05 User manual TR05 The radio module is designed for use in Scanreco industrial remote controls only that are permanently installed to provide a separation distance of at least 20 cm from the user and in hand-held / hand-operated remote control devices. This module is not for resale to the general public, installers, OEM integrators. This module is designed for use in Scanreco products only and is installed by or under the control of Scanreco.
PAGE 2
TR05 User manual Technical information The control and power connector is a standard 2.54mm, 16 way pin row. The functions of the pins are as follows: Pin 1: Power supply and signal ground. Pin 2: Power supply positive terminal. Accepts 5 to 8VDC. 7,2VDC nominal. Pin 3: Data input / output / ISO.
PAGE 3
TR05 User manual Radio Specification Attribute Frequency Channels Channels management Channel order Channel capacity Information 2400 – 2480 MHz 16 FHSS DSSS THSS Pseudorandom Duplex Channel bandwidth 2,7 MHz RF Power +18 dBm typical QPSK <16777216 unique system addresses available Modulation System address/I D Redundancy Range Duty cycle CRC-16 100 meter Maximum duty cycle set by the factory: for permanently installed equipment with 20 cm separation distance from users 72,36%; - for hand-held /
PAGE 4
TR05 User manual FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.