Instruction Manual G5 LP Document 66067 Revision A Language English
Document type Document number Instruction Manual 66067 Rev A Page 2 of 9 Document information Attribute Information Document Type Instruction Manual Title SCANRECO G5 Pocket Document No. 66067 Language English Release date 2014-02-07 Original English Release date (original) 2014-02-07 Author SCANRECO Company SCANRECO AB, SWEDEN All rights reserved Design, equipment, technical data and specifications are subject to change or improvement without prior notice.
Document type Document number Instruction Manual 66067 Rev A Page 3 of 9 G5 Pocket Transmitter Product description The G5 Pocket HCU is a light weight, impact and water resistant handheld unit equipped with up to eight ON/OFF function buttons. It has five configurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LED’s can be configured for a variety of different operations.
Document type Document number Instruction Manual 66067 Rev Page 4 of 9 A Versions The G5 Pocket transmitter exists in the following versions: G5 LP3 1 2 3 IN ON OUT OFF G5 LP8 G5 LP6 G5 LP4 G5 LP8 G5 LP8 1 2 3 1 2 3 1 2 3 1 2 3 4 5 6 4 5 6 4 5 6 4 5 6 7 8 Model Functions G5 LP3 3 Push buttons G5 LP4 4 Push buttons G5 LP6 6 Push buttons G5 LP8 8 Push buttons ON OFF The models may have the different printed symbols on the buttons, colors, scripts, picture
Document type Document number Instruction Manual 66067 5.4 Rev A Changing battery The G5 Pocket transmitter is equipped with 3 standard AAA cell batteries; to change batteries follow the instructions below 1. Remove the belt clip by unscrewing the top middle screw. 2. Unscrew the three screws holding the lid. 3. Remove the batteries. 4. Remove all dirt/dust to ensure no water can enter the unit. 5. Insert new batteries, mind the polarity! 6. Reassemble the lid and the belt clip.
Document type Document number Instruction Manual 66067 Rev A Page 6 of 9 Technical information Attribute Information Housing material Plastic PC-ABS IP-class IP67 Ambient temperature -25˚C to +70˚C Supply 3 x AAA battery Operating time Several months (depending of usage and application) Weight 160 g (0,35lb.) including battery Dimensions: 38mm 67mm 27mm 115mm 75,2mm 38,8mm Size : approx. ~ 115 x 67 x 38 mm / ~ 4,5 x 2,6 x 1,5 in. (incl. belt clip/holder). Weight: incl. battery: approx.
Document type Document number Instruction Manual 66067 Rev A Page 7 of 9 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom sequence.
Document type Document number Instruction Manual 66067 Rev A FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.