Instruction Manual G5 CU R Document 66063 Revision A Language English
Document type Document number Instruction Manual 66063 Rev A Page 2 of 8 Document information Attribute Information Document Type Instruction Manual Title SCANRECO G5 CU R Document No. 66063 Language English Release date 2013-05-20 Original English Release date (original) 2013-05-20 Author SCANRECO Company SCANRECO AB, SWEDEN All rights reserved Design, equipment, technical data and specifications are subject to change or improvement without prior notice.
Document type Document number Instruction Manual 66063 Rev Page 3 of 8 A G5 receiver Product description The Central Unit (CU) is manufactured in robust plastic housing and provides contacts for the connection of power supply and electro-hydraulic valves. Several of the outputs can also be used as digital inputs. Depending on the version of the G5 Central unit, it can either be equipped with MOSFET outputs and Deutsch connectors or can have relay outputs with terminal block.
Document type Document number Instruction Manual 66063 Rev A Models Model Functions G5CU R5 Two cable glands. 5 Relay outputs. G5CU R10 Two cable glands. 10 Relay outputs. Expansion boards The main board may be used stand alone or together with one expansion board. There are several different expansion boards. All expansions boards have the same mechanical outline. They may have different funcionalities depending on customers application.
Document type Document number Instruction Manual 66063 Rev A Page 5 of 8 Technical Data Central Unit Information Housing material Plastic PC IP-class IP67 (for versions with cable glands IP65) Ambient temperature -25˚C to +70˚C Supply voltage 9-36VDC Fuse Not required. Current consumption at idle <30mA Relay Output load Max 10 A Housing screw torque 0,8 Nm Weight Approx. 0,35Kg 117mm 186mm Attribute 57mm 127mm Size: approx. ~ 127 x 117 x 57 mm / ~ 5,0 x 4,6 x 2,2 in.
Document type Document number Instruction Manual 66063 Rev A Page 6 of 8 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom sequence.
Document type Document number Instruction Manual 66063 Rev A FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
