Instruction Manual G5 CU M Document 66064 Revision A Language English
Document type Document number Instruction Manual 66064 Rev A Page 2 of 9 Document information Attribute Information Document Type Instruction Manual Title SCANRECO G5 CU M Document No. 66064 Language English Release date 2013-05-20 Original English Release date (original) 2013-05-20 Author SCANRECO Company SCANRECO AB, SWEDEN All rights reserved Design, equipment, technical data and specifications are subject to change or improvement without prior notice.
Document type Document number Instruction Manual 66064 Rev A Page 3 of 9 G5 receiver Product description The Central Unit (CU) is manufactured in robust plastic housing and provides contacts for the connection of power supply and electro-hydraulic valves. Several of the outputs can also be used as digital inputs. Depending on the version of the G5 Central unit, it can either be equipped with MOSFET outputs and Deutsch connectors or can have relay outputs with terminal block.
Document type Document number Instruction Manual 66064 Rev A Page 4 of 9 MOSFET Digital Output The MOSFET digital outputs are designed to control electro-hydraulic valves but can also be used to load other accessories such as lamps or motors. Digital inputs The digital inputs can be used as a switch to control different functions on the central unit or on the HCU. The maximum input voltage shall not exceed the supply voltage. Estop The Estop function works as a safety function.
Document type Document number Instruction Manual 66064 Rev A Page 5 of 9 Terminal schematics G5-CU M19 7 6 8 5 9 4 10 11 12 3 2 1 1 2 3 12 11 10 4 9 5 8 6 7 Main board 1 = Output/input 16 2 = Output/input 15 3 = GND 4 = Output/input 14 5 = Estop 6 = Power Supply + 7 = Output 1 8 = Output 2 9 = Output 3 10 = Output 5 11 = Output 4 12 = Output/input 6 1 = Output/input 7 2 = Output/input 8 3 = Output/input 9 4 = Output/input 10 5 = Output/input 11 6 = Output/input 12 7 = RS232 TX 8 = RS232 RX 9 =
Document type Document number Instruction Manual 66064 Rev A Page 6 of 9 Technical Data Central Unit Information Housing material Plastic PC IP-class IP67 (for versions with cable glands IP65) Ambient temperature -25˚C to +70˚C Supply voltage 9-36VDC Fuse Not required. Current consumption at idle <30mA MOSFET Output load 3 A, Max simultaneously load for each CU is 10A. Relay Output load Max 10 A Housing screw torque 0,8 Nm Weight Approx.
Document type Document number Instruction Manual 66064 Rev A Page 7 of 9 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom sequence.
Document type Document number Instruction Manual 66064 Rev A FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
