Users Manual

ManualsBrandsScanreco ManualsElectronics2.4 GHz Transceiver

Scanreco AB

Stensätravägen 13, SE-127 39 Skärholmen

Box 90304, SE-120 25 Stockholm, Sweden

Tel +46 8 556 32 800

www.scanreco.com

Portable control unit (transmitter) D3 DRC-J/JS

D3 DRC-J: 2.4 GHz transmitter

D3 DRC-JS: 2.4 GHz transmitter with key-operated safety switch

D3 DRC-J

Summary of content (5 pages)

PAGE 1
Portable control unit (transmitter) D3 DRC-J/JS D3 DRC-J: 2.4 GHz transmitter D3 DRC-JS: 2.4 GHz transmitter with key-operated safety switch D3 DRC-J Scanreco AB Stensätravägen 13, SE-127 39 Skärholmen Box 90304, SE-120 25 Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.
PAGE 2
Example for a host product: Scanreco AB Stensätravägen 13, SE-127 39 Skärholmen Box 90304, SE-120 25 Stockholm, Sweden Tel +46 8 556 32 800 www.scanreco.
PAGE 3
The difference between DRC-J and DRC-JS is that the model DRC-J does not have the safety key switch. This product is intended to be installed in a remote-control system as a transmitter and it is designed preferably for wireless control of crane installations, travelling hoist units, chain and rope hoists, transfer carriages and similar applications.
PAGE 4
Installation description: 1- Place the electronics board as shown in the Figure and make sure the flex cables are on the component side of the board 2- Connect the socket strips, actuators and the vibrator from the top according to Figure. 3- Tighten the board with screws 0.2Nm as shown in Figure.
PAGE 5
FCC information This equipment has been tested and found to comply with the limits for a Class a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.