Scandinavian Reach Technologies AS User manual & Product Data sheet SRT PT-01 In:Range Personnel Tag
Content Preface .................................................................................................................................................... 3 Copyright ............................................................................................................................................. 3 Disclaimer............................................................................................................................................ 3 Declaration of Conformity ............
Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from Scandinavian Reach Technologies AS. Disclaimer The information in this document is subject to change without prior notice and does not represent commitment from Scandinavian Reach Technologies AS.
Technical Support and Assistance 1. For the most updated information of Scandinavian Reach Technologies AS products, visit the company website at www.scanreach.com. 2.
Product and Architectural Design information SRT PT-01 Functional description The Scandinavian Reach Technologies AS SRT PT-01 Personnel tag is a wearable device intended to report its location within predefined areas. The tag communicates with Scandinavian Reach Technologies AS Mesh nodes via built-in 2,4 GHz Bluetooth radio. The Personnel tag includes a pressable button. The function of this button is: 1. To trigger alarm in case of emergency issues. 2. To activate and de-activate the tag.
Specification of modulation type and data protocol In normal operation the SRT PT-01 is configured using advertisement over Bluetooth 5 Low Energy1. The modulation is GFSK. Running in advertising mode, advertising packets are sent periodically on each advertising channel. The time interval between packet set has both a fixed interval and a random delay. The interval is specified between the set of 3 packets over the 3 used channels (37, 38 and 39).
Figure 1- Tag and Meshnode overview Figure 2- Tag and Meshnode communication pattern Hardware specifications Power input x Battery: CR 2032 3V Li-ion Power usage x x ~ 0.
Physical dimensions x x Size: 43mm x 28mm x 10mm Wearable strap (bracelet, necklace or anklet) maximum size 19mm x 3mm Radio transmitter characteristics x x x 2,4 GHz Bluetooth (2.4 - 2.4835GHz) TX power +4 dBm Antenna – PCB, 1.
Manufacturer: Topro Industri AS Adr: Rambekkvegen 1, 2816 Gjøvik, Norway Tlf: + 61 13 46 00 Printed in Norway www.scanreach.com In:Range SRT PT-01 © 2019 Scanreach. All rights reserved.