Scandinavian Reach Technologies AS User manual SRT MN-01
Innhold Preface .................................................................................................................................................... 3 Copyright ............................................................................................................................................. 3 Disclaimer............................................................................................................................................ 3 Declaration of Conformity ............
Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from Scandinavian Reach Technologies AS. Disclaimer The information in this document is subject to change without prior notice and does not represent commitment from Scandinavian Reach Technologies AS.
Technical Support and Assistance 1. For the most updated information of Scandinavian Reach Technologies AS products, visit the company website at www.scanreach.com. 2.
Product and Architectural Design information SRT MN-01 Functional description The Scandinavian Reach Technologies AS SRT MN-01 Mesh Node is a wireless network device intended to transport data in a Mesh network structure within steel confined areas. Several nodes are connected via built-in radio transmitters. The data is collected from SRT PT-01 or other adequate sensors via Bluetooth protocol. The end node is connected to a Gateway computer, collecting data sent through the network.
x x x The battery status of the tag Button press status The temperature of the tag Mesh nodes listen for these beacon messages by filtering on a unique message type-identifier in each message. In addition, both advertisements from tags and communication from mesh nodes are filtered based on white listing 1at a system level. The mesh node can update its own firmware if supplied signed over the mesh network.
Description of integrity and authenticity measures Mesh network The SRT MN-01 communicates with other mesh-nodes using a proprietary protocol using either frequencies in the 865-868MHz, 902-928MHz or 2,4-2,4834GHz range. The protocol builds and maintains a Destination-Oriented Directed Acyclic Graph topology that originates from a designated root node, which typically also serves as a border router to a computer. Routing information is disseminated through broadcast beacons a-periodically using timers.
Figure 1- Tag and Meshnode overview Figure 2- Tag and Meshnode communication pattern Hardware specifications Power input x x 5 V Micro USB connection MiNMax - HHS-LP-P24, 3.
Physical dimensions x x x Size: 66,5mm x 68,5mm x 19mm Total surface area: 14068 mm2 Weight: 79 g Radio transmitter characteristics x x 2,4 GHz (prop & Bluetooth) Sub-GHz (865-868 / 902-928) Certifications x x x CE (pending) FCC Class B (pending) DNV-GL CG0339 & CP0302 (pending)
Manufacturer: Topro Industri AS Adr: Rambekkvegen 1, 2816 Gjøvik, Norway Tlf: + 61 13 46 00 Printed in Norway www.scanreach.com In:Range SRT MN-01 Rev A © 2019 Scanreach. All rights reserved.
