Wireless accessories Remote Control 3.
Introduction to this booklet Intended use This booklet guides you on how to use and maintain your new Remote Control 3.0. Please read the booklet carefully including the Warning section. This will help you get the most out of your new remote control. Remote Control 3.0 is intended to assist users of wireless hearing aids control functionality provided by their hearing solution. If you have further questions about using your remote control, please contact your hearing care professional.
Table of contents About Warnings Package contents Product overview 6 7 Startup Batteries Insert batteries Pairing the remote control with your hearing aids 8 9 11 Operating range Confirmations Change program Adjust volume Mute Unmute Strap hole Taking care of your remote control 14 15 17 18 19 20 21 22 Daily use Warnings 24 International warranty Technical information 28 29 More info
Package contents Product overview You will find the following items in the package: Status light Remote Control 3.0 Batteries This booklet Wireless accessories Remote Control 3.
Batteries Insert batteries To activate the remote control you need to insert two AAAA batteries into the battery compartment. See the “Insert batteries” section. 1 Remove + Gently remove the battery cover. Remove any used batteries. About Startup Daily use Warnings More info 3 Close Click Battery life will vary depending on the conditions of use. Standard use requires battery replacement approximately once a year. 8 2 Insert Place the new batteries in the battery compartment.
The battery cover should never be forced. If force is required to click the battery cover into place, check the alignment and reposition the cover so that it clicks easily into place. Pairing the remote control with your hearing aids The remote control is a personal device intended to be used with one set of hearing aids. The remote control can operate up to two hearing aids at a time after pairing. Before the remote control can be used with your hearing aids, the devices need to be paired.
1 Remote control ready 2 Hearing aids ready 3 In range 4 Pairing 5 Paired Check that the remote control has working batteries by pressing any button. Open and close the battery drawer on both of your hearing aids. Place both of your hearing aids within range of the remote control (i.e. within 20 cm). Press any button on the remote control and it will automatically pair with the hearing aids in range.
Operating range Confirmations With the remote control you can operate your hearing aids from a distance of up to 1.8 metres. A direct line of sight between the remote control and your hearing aids is not required. If you have paired two hearing aids to the remote control, both will be adjusted at the same time. Visible indications The status light on the remote control will light up when a button is pressed. Up to 1.
Battery low If the batteries are running low the status light will blink rapidly whenever a button is pressed. In this case replace the batteries at your earliest convenience. Change program The remote control can be used to change program if your hearing care professional has made more than one program available in your hearing aids. Simply press the “•” button on the remote control to go through the hearing aid programs. Each press will advance the hearing aids to the next program in the cycle.
Adjust volume Mute With the remote control you can adjust the volume of your hearing aids by using the volume control buttons. Use the mute function if you need to silence the hearing aids while wearing them. Press and hold the volume down button for approximately 2 seconds until the status light turns off, to mute the hearing aids. You will hear a short confirmation in your hearing aids when you turn the volume up or down.
Unmute Strap hole Briefly press any button on the remote control to unmute your hearing aids. The remote control has a strap hole in the lower left corner. Any suitable hand strap can be used. IMPORTANT NOTICE Please refer to your hearing aid’s “Instructions for Use” for details on the functionality of your specific hearing aid solution.
Taking care of your remote control When changing the batteries or cleaning the remote control, hold it over a soft surface to avoid damage if you drop it. IMPORTANT NOTICE Use a soft, dry cloth to clean the remote control. It must never be washed or immersed in water or other liquids.
Warnings You should familiarize yourself fully with the following general warnings and the entire contents of this booklet before using your remote control to ensure personal safety and correct use. Consult your hearing care professional if you experience unexpected operations or events with your remote control.
Warnings Possible side effects • The otherwise non-allergenic materials used in your remote control may in rare cases cause skin irritation or other side effects. Please seek consultation with a physician if these conditions occur. Heat and chemicals • Your remote control must never be exposed to extreme heat e.g. left inside a parked car in the sun. • Your remote control must not be dried in microwave ovens or other ovens.
International warranty Your remote control is covered by an international limited warranty issued by the manufacturer for a period of 12 months from the date of delivery. This limited warranty covers manufacturing and material defects in the device itself, but not in accessories such as e.g. batteries, cables, power supplies, etc.
The remote control complies with international standards concerning electromagnetic compatibility and human exposure. Due to the limited space available on the remote control, relevant approval markings can be found in this document. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
0000167451000001
