Quick Start Guide and Tour strengthbynumbers.com/axitsystem v2.
Get to know your devices! Red LED Charging Indicator Green LED Activity Indicator 1 2 3 USB Charging Port
Setting up your AxIT App 1/ Turn on your tablet and unlock the home screen by using an ‘S’ pattern 2/ Once unlocked, find the AxIT App located on the home screen and tap to open the app 3/ Log-in to your AxIT App with the email address and your password you signed up with.
Setting up your AxIT App 4/ Click the button in the top right corner to open the Settings 5/ On the left hand side of the screen is the list of settings pages (see Guide To Settings for details on these). Click the button to open the Database management page 6/ Set-up your backup and Google Account. Click on the “Choose Account” button on the right hand side of the Database management page, and add your Google-based account.
Check your devices 1/ Your AxIT devices are always in ‘on mode’ and ready to use when charged – there is no power button. Firstly, confirm that the devices are on by checking that the green LED (1) is blinking once intermittently. 2/ If any of the AxIT devices are not blinking, they may need to be charged via the USB port on the device (3) and the USB charger provided. You can see the charge status of your devices in the tablet notifications by swiping down from the top of the tablet.
You are ready to AxIT! You are now ready to start using the world's most complete assessment system. Tap "New Client" to create a new client profile and start testing. Quick steps to get the most out of your AxIT system Step 1: Log into the AxIT online portal at www.strengthbynumbers.
Guide to the Settings Page This is where you can set up your business details including add a logo to be displayed on all reports. This is where you can see the Clients that have been saved in the system, edit or delete their details. This is where you can duplicate, rename and create custom variations of tests for your AxIT Testing. This is where you can set-up your own Custom Playlists of selected tests to streamline your testing.
REGULATORY INFORMATION STOMP-2 FCC ID: 2A733-STOMP-2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.