Function & Operation manual CSS code home Roger & Key Jon Bandleader FRE Canned hid POWER SAVE BAL WATCH Power button Pressing the parer button for 2 seconds will activate the unit. The speaker will sound a bicep tone 10 sm the transceivers titivation, Tn addition, the transceiver will perform & Fondness power-on selectivity, whereby the LUD display will show all functional items. including a test of both the digit channel display and the CSS channel dispel {eo turn the unit off.
Key tone/Roger Beep Selection Press “MODE” bites repeatedly unl © 5 "icon blinks, Press the Up(+} or the Down(-) button te select 8 “Gr”, This function will be started to aerate after function aeration is finished. 1f then, key tone will be rung whenever any fifteens are pressed except “VOM” and “PTT And, Roger beep is a tone which is automatically transmitted whenever the PTT button is released. This tame alerts the receiving party that the transmission has been misaligned intentionally.
Low battery alert If the battery verbiage is low, © E23 eon will be appeared with beep sound fo warn the user halt the batteries must be replaced. Monitor operation Yiu can ma niter a channel by the button “VOMIT “over | second. By pressing the button "VOX" over 3 second. the monitoring will be continued, While vou monitor channels, pushing fhe “VOMIT “ butane one more will terminate this function. Accrual Watch This feature allows vou th monitor two channels at the sear time.
CSS TONE FREQUENCY TABLE Ni.
Safety information For FRS UNIT Your wireless handheld portable transceiver contains a low power transmitter. When the PTT button is pushed it sends out radii frequency (RF) signals This device is authorized to operate at a duly factor not 1 exceed 50%. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices. important.