Product Information

ManualsBrandsSB C&S ManualsElectronicsGLIDiCSoundAir SPT-7000

Table Of Contents

SB C&S.Corp.

GLIDiC Sound Air SPT-7000

SB-WS73-MRTW

manual

Bluetooth-enabled smart phones, tablets, and other Bluetooth devices with music playback

and call capabilities

Product Information

using temperature range：5℃～35℃

● Earphones body

Built-in battery: 3.7V 60mAh

Bluetooth Spec.：Version 5.0

Communication distance：about 10m（input：Class 2）*

Profile：A2DP, AVRCP, HFP, HSP

Communication distance：SBC, AAC, apt XTM

Corresponding code：SCMS-T

Number of recorded devices: up to 7 units

Dimensions：about 23（W）×19（D）×24（H）mm

＊: It different according to the environment in which it is used

● Charging case

Built-in battery : 3.7V 460mAh

Wire : micro USB (Type-B) cable

Dimensions：about 80（W）×28（D）×36（H）mm

●Charging wire

Wire: micro USB (Type-B) cable

USB (Type - A) Connector length : about 30cm

Corresponding to the machine

Summary of content (7 pages)

PAGE 1
SB C&S.Corp. GLIDiC Sound Air SPT-7000 SB-WS73-MRTW manual Corresponding to the machine Bluetooth-enabled smart phones, tablets, and other Bluetooth devices with music playback and call capabilities Product Information using temperature range：5℃～35℃ ● Earphones body Built-in battery: 3.7V 60mAh Bluetooth Spec.：Version 5.
PAGE 2
Action time Music playback time / call time: about 8 hours When using a charging case Music playback time / call time: Approx. 20 hours charging Time: About 1 hour for earphone, 2 hours for case * Varies depending on the usage environment. First use Before using this product, be sure to read the "simple guide" and instructions. And please take good care of it after reading. ● About the book ・ The average smartphone has download screens and steps.
PAGE 3
＊: → To delete registration information (reset)” LED display description After entering the login mode for 3 minutes, and the device is disconnected for 3-6 minutes, the headset will ● Earphone automatically timeout and power off Des LED ● Charging case The relationship between the charging case LED and charing light on Power on slow flash of red light overtime low flash of red light ＊ logging R R ・・・ 1 LED light flashes half 2 LED light flashes much 3 LED light flashes ・・・ W light 5
PAGE 4
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
PAGE 6
About the product information  product name ：GLIDiC Sound Air SPT-7000  model NO.  The BQB logo, MIC ID and logo are printed on the Earphones.  The product name and model number, FCC ID, IC and CE logo are printed on the charging ：SB-WS73-MRTW case. FCC ID: 2AO2PSPT-7000-R FCC ID: 2AO2PSPT-7000-L This device complies with Part 15 of the FCC Rules.
PAGE 7
About the reuse of small rechargeable batteries This product uses a lithium ion battery. Lithium-ion batteries are a valuable resource that can be recycled. Because this product has a built-in lithium-ion battery, it cannot be thrown away as general garbage. When handling (reusing) according to the product life, etc., please contact the following.