User Manual

ManualsBrandsSaxonar ManualsElectronicspower2max NG, power2max NG eco

User’s Manual

power2max NG Power Meter

1 Quick Start Guide

Warning

Please read the user’s manual carefully before installation and use! Improper installation can cause

accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque

values when installing screws and bolts. (See installation instructions at www.power2max.com.)

Before going on a ride, get to know the functions and operation of your power meter. Get a checkup

from a sports physician before starting your training program. Pay attention to traffic and road

conditions before checking any data.

Quick start guide

Thank you for choosing a power2max NG power meter! For installation, please download the

installation instructions: www.power2max.com

USB charging unit: Please note: To charge your NG power meter, an USB charging unit with the USB

2.0 or higher standard is required.

Included:

power2max NG power meter

USB power cable

Quick Start Guide including inspection certificate

Optional:

NG colored ring, USB charging unit, Installation tools, Crank set, Bottom bracket, Chainring set,

Chainring bolts

Installation and operation:

1. First, completely charge the power2max NG power meter:

a. Open the USB cover.

b. Connect the charging unit to the power2max NG power meter via the USB cable (the

LED indicator light flashes red during charging).

c. Charging is complete when the red LED indicator light turns off.

2. Remove the USB cable from the power2max NG power meter.

3. The LED indicator light blinks green. Close the USB cover and connect the power meter to

your bike computer or your Bluetooth-enabled smartphone (observe manufacturer’s

instructions).

4. Install chainrings onto the power meter. (Installation instructions at www.power2max.com.)

5. Install the power meter at the crank. (Installation instructions at www.power2max.com.

Observe manufacturer’s instructions for torque values!)

6. Install the crankset on the bicycle. (Installation instructions at www.power2max.com.

Observe manufacturer’s instructions for torque values!)

After installing, check the function of the front derailleur and adjust as necessary.

Finished! Now: go ride and have fun with your power2max NG!

Summary of content (13 pages)

PAGE 1
User’s Manual power2max NG Power Meter 1 Quick Start Guide Warning Please read the user’s manual carefully before installation and use! Improper installation can cause accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque values when installing screws and bolts. (See installation instructions at www.power2max.com.) Before going on a ride, get to know the functions and operation of your power meter.
PAGE 2
Contents 1 Quick Start Guide........................................................................................................................ 2 Contents............................................................................................................................... 3 Declaration of conformity............................................................................................................ 4 Warranty............................................................................
PAGE 3
Declaration of conformity DECLARATION OF CONFORMITY Saxonar GmbH hereby declares that the power2max power meter complies with the essential requirements and further relevant provisions of the 1999/5/EC Directive. The complete declaration of conformity is available at https://www.power2max.
PAGE 4
DÉCLARATION DE CONFORMITÉ Saxonar GmbH déclare par la présente que power2max est conforme aux exigences essentielles et aux autres dispositions pertinentes de la 1999/5/EC Directive. La déclaration de conformité complète est disponible à l'adresse https://www.power2max.
PAGE 5
4 Warranty 4.1 Scope of warranty Unless it is stated differently in this document, Saxonar GmbH guarantees that the product is free of manufacturing and material defects. Any claims resulting from this warranty are to be directed to the Saxonar GmbH. The original proof of purchase must be submitted.
PAGE 6
Dust seals Sockets/bushings Airtight O-rings Mechanical seals Moveable rubber parts Foam rubber rings Stripped threading/screws (aluminum, titanium, magnesium or steel) Tools Batteries (also rechargeable batteries) The warranty for the batteries (also rechargeable batteries) and the power meter does not apply to damages resulting from power surges, the use of improper charging units, a lack of maintenance or any other inappropriate use.
PAGE 7
5 Introduction Thank you for choosing a power2max power meter. Reaching beyond your previous limits is not always a question of major changes; but you need to use the right tools at the right times. Our products are easy to use, intuitive to operate and user-friendly while offering you very precise and consistently reliable power data – no matter where and when you ride your bike. Your power2max power meter was carefully developed and assembled in Germany by hand in 56 steps.
PAGE 8
7 Operation and installation Please note: It is necessary to observe indicated torque values during installation. You can also find these values in the download area of power2max.com. Screw and bolt connections that are torqued too heavily or weakly could damage the power meter and impair the function. In the case of bicycle frames with a BB86 or BB386EVO bottom bracket standard, the compatibility between the power meter and frame must be tested before installation. 7.
PAGE 9
7.3 Head units You need an ANT+-enabled head unit that supports the power-only profile (PWR). For example, suitable head units are: CYCLEOPS: Joule 2.0 and 3.0 GARMIN: Edge 500/510/520/800/810/820/1000, Forerunner 310XT/910XT O-SYNCE: navi2coach, Macro X and Macro High X Wahoo: Elemnt You can find a current list of compatible products at the ANT+ Alliance: http://www.thisisant.
PAGE 10
8 Using your power meter Using your power2max NG power meter is as easy as the initial operation and installation is. 8.1 Before your ride When your bicycle isn’t being used, the power2max NG power meter is in standby. When the crank is moved, the power2max NG power meter is activated automatically, and the power2max NG power meter begins emitting a signal. This is shown by the blinking of the green LED indicator light.
PAGE 11
8.8 Turning the power meter on and off 1. Turn it off: Plug the big end of your USB cable into the charging unit. Open the USB port cover on the power meter, plug the small end of the USB cable into the USB port and remove it within two seconds again! 2. Turn it on: Plug the big end of your USB cable into the charging unit. Open the USB port cover on the power meter, plug the small end of the USB cable into the USB port and wait until the green LED indicator light turns on.
PAGE 12
11 Service calibration and control of function The power2max NG power meter is calibrated at the factory and doesn’t have to be newly calibrated within the warranty period. Regardless of this fact, you still have the option of ordering a calibration and function control in our Web Shop. In this case, we will examine your power2max NG power meter on the outside, perform a new factory calibration and control of function.
PAGE 13
Technical specifications Weight: depending on the version – details on the website Power source: battery Battery life: approximately 150 hours of active power measurement Transmission standards: ANT+ Power Only Profile, BLE Cycling Power Profile Transmitted data: Power, Cadence, Left-right distribution ("Balance"). Note: power left = pressure left pedal + pull on right pedal; power right = pressure right pedal + pull on left pedal.