User Manual

ManualsBrandsSaxonar ManualsElectronicspower2max NG, power2max NG eco

User’s Manual

power2max NGeco

deutsch

1 Quick Start Guide

Warning

Please read the user’s manual carefully before installation and use! Improper installation can cause

accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque

values when installing screws and bolts. (See installation instructions at www.power2max.com.)

Before going on a ride, get to know the functions and operation of your power meter. Get a checkup

from a sports physician before starting your training program. Pay attention to traffic and road

conditions before checking any data.

Quick start guide

Thank you for choosing a power2max NGeco power meter!

Scope of delivery

Included:

power meter power2max NGeco

Quick Start Guide including inspection certificate

Optional:

Lockring tool

power meter crankset

bottom bracket

chainring set

chainring bolts

Installation and operation:

1. Remove the red isolation strip by pulling it out of the battery compartment. (You do not

need to open the battery compartment.)

2. The LED indicator is now flashing green. Please connect the power meter to your head unit

(observe manufacturer’s instructions).

3. Install the chainrings to the power meter (observe manufacturer’s instructions and torque

values!).

4. Install the power meter to the crankset (observe manufacturer’s instructions and torque

values!).

5. Install the crankset to the bicycle (observe manufacturer’s instructions and torque values!).

After installing, check the function of the front derailleur and adjust as necessary.

Finished! Now: go ride and have fun with your power2max NGeco!

deutsch

Summary of content (12 pages)

PAGE 1
User’s Manual power2max NGeco deutsch 1 Quick Start Guide Warning Please read the user’s manual carefully before installation and use! Improper installation can cause accidents. In case of doubt, consult a professional bicycle mechanic. Observe the indicated torque values when installing screws and bolts. (See installation instructions at www.power2max.com.) Before going on a ride, get to know the functions and operation of your power meter.
PAGE 2
Contents 1 Quick Start Guide............................................................................................................................... 2 Contents............................................................................................................................... 3 Declaration of conformity...................................................................................................................... 4 Warranty............................................................
PAGE 3
Declaration of conformity Saxonar GmbH hereby declares that the power2max power meters complies with the essential requirements and further relevant regulations of the 1999/5/EG Directive. You can view the complete text of the declaration of conformity at www.power2max.com.
PAGE 4
Déclaration de Conformité RoHS Saxonar GmbH certifie que ce produit et son emballage sont conformes à la directive européenne 2002/195 / CE sur la Limitation de l'utilisation de Certaines Substances Dangereuses dans les Équipements Électriques et Électroniques, connue sous le nom de RoHS. Statement of Compliance for Japan Japanese Radio Law Compliance. This device is granted pursuant to the Japanese Radio Law (電波法).
PAGE 5
4.4 Limitation of liability To the degree allowed in accordance with local regulations and with the exception of the expressly described obligations in this warranty, the Saxonar GmbH and its suppliers exclude any liability for direct, indirect, special, accidental/coincidental or consequential damages. 4.5 Warranty disclaimer The warranty does not apply to products that are not installed and/or adjusted professionally or in accordance with Saxonar GmbH’s appropriate user’s manual.
PAGE 6
5 Introduction Thank you for choosing a power2max NGeco power meter. Your power2max NGeco is a quality product that has been developed and manufactured with great care by the power2max Team. It offers you precise and reliable power measurement in all weather conditions while being simple and intuitive to operate. Please read the user’s manual carefully before using and observe the directions for correct use of your power2max NGeco power meter.
PAGE 7
.1 Necessary tools In the case of models with lockrings like FSA BB386evo, a specific lockringtool for installing the crankset to the power2max NGeco power meter is needed. Depending on the model: medium-strength threadlock (e.g. Loctite 243). Optional: bench vice to fixate the lockring tool during installation. 7.2 Operation Your power2max NGeco power meter has an LED indicator light to control its function.
PAGE 8
Lock the lockring tool into a vice. This guarantees that the lockring tool is secure and stable for further installation: tighten the lockring to the prescribed torque values. You can also find these values in the download area on power2max.com or ask the crankset manufacturer. 5. Install the entire power meter unit with crankset to your bicycle. To do so, follow the steps in the installation instructions provided by the crankset manufacturer.
PAGE 9
8 Using your power meter Using your power2max NGeco power meter is as easy as the initial operation and installation is. 8.1 Before your ride When your bicycle isn’t being used, the power2max NG power meter is in standby. Once the crank is moved, the power2max NGeco power meter is activated automatically, and it begins emitting a signal. This is shown by the blinking of the green LED indicator light. 8.
PAGE 10
8.8 After a crash The power2max NGeco power meter was developed to have a high level of reliability. Usually, crash forces are generally completely absorbed by the crankarms and the bottom bracket. Crash damage to a power2max NGeco power meter is thus almost completely ruled out. In the interest of your own security and health, you should do the following checks: Could the cranks have sustained any damage? The cranks could suffer from hairline fractures that you may eventually not recognize.
PAGE 11
13 Service calibration and control of function The power2max NGeco power meter is calibrated at the factory and doesn’t have to be newly calibrated within the warranty period. Regardless of this fact, you still have the option of ordering a calibration and function control at www.power2max.com. In this case, we will examine your power2max NGeco power meter on the outside, perform a new factory calibration and control of function.
PAGE 12
15 Technical specifications Weight: depending on the version – details on the website Power source: battery Battery life: approximately 400 hours of active power measurement Transmission standards: ANT+ Power Only Profile Transmitted data: Power, Cadence Accuracy: ±2% Additional features: Active thermal correction Automatic zero-point adjustment Calibration is independent of chainring selection No magnet necessary for cadence measurement Range of measurement and display: Power: 10 - 2999 W Torque: 0 - 250 N