sauder.com Here's one for the books. 5-Shelf Bookcase Model 413324 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-445-1527. PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-12 Français pg 13-14 Español pg 15-16 Share your journey! Lot #: 390076 Date Purchased: __________________ 03/29/16 Be sure to give us a ring before making any returns.
Table of Contents Part Identification Hardware Identification Assembly Steps Assembly Tools Required 3 No. 2 Phillips Screwdriver Tip Shown Actual Size 4 5-14 Hammer Français 15-17 Español 18-20 Safety 21-22 Warranty Page 2 Not actual size Electric drill with 1/4" bit (ONLY in indicated step) 23 www.sauder.
Now you know our ABCs. Part Identification å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts. A UPPER END (2) B LOWER LEFT END (1) C LOWER RIGHT END (1) D FIXED SHELF (1) E TOP/BOTTOM (2) F ADJUSTABLE SHELF (3) G BACK (2) G E A F F A D G B F C E 413324 www.sauder.
Hardware Identification å Screws are shown actual size. You may receive extra hardware with your unit. 1A CAM SCREW - 4 1B HIDDEN CAM - 4 2 1-3/4" FLAT HEAD SCREW - 10 3 SHELF SUPPORT - 12 5 SCREW COVER CARD - 1 6A WALL ANCHOR - 1 7A SAFETY BRACKET - 1 7B Page 4 1/2" PAN HEAD SCREW - 1 www.sauder.
Look for this icon. It means a video assembly tip is available at www.sauder.com/services/tips Step 1 å å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor. Push four HIDDEN CAMS (1B) into the LOWER ENDS (B and C). Scan this QR code or go to this address: http://qr.sauder.com/?ID= 1469 to watch a video on how to assemble your unit. Arrow 1B B C Arrow 413324 1B www.sauder.
Step 2 å Turn four CAM SCREWS (1A) into the FIXED SHELF (D). 1A D Page 6 www.sauder.
Step 3 å Fasten the UPPER ENDS (A) to a TOP/BOTTOM (E). Use four 1-3/4" FLAT HEAD SCREWS (2). å Fasten the FIXED SHELF (D) to the UPPER ENDS (A). Use two 1-3/4" FLAT HEAD SCREWS (2). Caution Do not stand the unit upright without the BACK fastened. The unit may collapse. 2 Unfinished edge E ce urfa s d ishe Fin Unfinished edge A Sur mo face w re h ith ole s 2 A Sur fewface w er h ith ole s D ce urfa s d ishe n fi Un 2 1-3/4" FLAT HEAD SCREW (6 used in this step) 413324 www.sauder.
Step 4 å å Unfold a BACK (G) and lay it over your unit. å Fasten the BACK (G) to your unit using the NAILS (4). The NAILS should be approximately 5" apart, 1-1/2" from the corners, and 1/4" in from the edges. å NOTE: Do not nail the BACK into the FIXED SHELF (D) until step 7. Caution Make equal margins along all four edges of the BACK (G). Push on opposite corners of your unit if needed to make it "square". Do not stand the unit upright without the BACK fastened. The unit may collapse.
Step 5 å Fasten the LOWER ENDS (B and C) to the FIXED SHELF (D). Tighten four HIDDEN CAMS. 1 2 Unfinished edge D B Sur mo face w re h ith ole s C Sur fewface w er h ith ole s 413324 www.sauder.
Step 6 å Fasten the remaining TOP/BOTTOM (E) to the LOWER ENDS (B and C). Use four 1-3/4" FLAT HEAD SCREWS (2). Unfinished edge 2 B C Unfi ce urfa s ed nish E 2 1-3/4" FLAT HEAD SCREW (4 used in this step) Page 10 www.sauder.
Step 7 å Fasten the remaining BACK (G) to the lower portion of your unit using the NAILS (4). The NAILS should be approximately 5" apart, 1-1/2" from the corners, and 1/4" in from the long edges and short edge along the BOTTOM (E). å NOTE: The bottom edge of the BACK (G) should be even with the bottom surface of the BOTTOM (E). å å NOTE: The lower BACK will overlap the upper BACK. Caution Do not stand the unit upright without the BACK fastened. The unit may collapse.
Step 8 å Carefully stand your unit upright. We recommend using the SAFETY BRACKET (7A) for added stability. Fasten the SAFETY BRACKET to a stud in your wall. Use the 1" PAN HEAD SCREW (8). å If you can not find a stud in your wall, drill a 1/4" hole in your wall for the WALL ANCHOR (6A). Push the WALL ANCHOR into the hole. Fasten the SAFETY BRACKET (7A) to the wall. Use a 5/8" PAN HEAD SCREW (6B) through the SAFETY BRACKET and into the WALL ANCHOR.
Step 9 å Insert the SHELF SUPPORTS (3) into the holes of your choice in the ENDS (A, B, and C). Place the ADJUSTABLE SHELVES (F) onto the SHELF SUPPORTS. A F A F C F B 3 (12 used) 413324 www.sauder.
Step 10 å Peel the screw covers from the SCREW COVER CARD (5). Place a screw cover over the heads of each SCREW in your unit. å Peel the CAM COVERS (1C) from the cards and place them over each HIDDEN CAM . å NOTE: Please read the following pages of the instruction booklet for important safety information. å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. And to celebrate, why not share your success story? No load 5 25 lbs.
413324 Utilisez les instructions d’assemblage en français avec les schémas étape par étape du manuel d’instruction en anglais. Chaque étape en français correspond à la même étape en anglais. La pièce devant être attachée à l’élément est représentée en gris sur les schémas de chaque étape pour plus de précision. Comparer la “Liste de pièces” ci-dessous avec la “PART IDENTIFICATION” du manuel en anglais pour vous familiariser avec les pièces avant l’assemblage.
ÉTAPE 1 ÉTAPE 5 Assembler l'élément sur un sol à moquette ou sur le carton vide pour éviter d'endommager l'élément ou le sol. Fixer les EXTRÉMITÉS INFÉRIEURES (B et C) sur la TABLETTE FIXE (D). Serrer quatre EXCENTRIQUES ESCAMOTABLES. Enfoncer quatre EXCENTRIQUES ESCAMOTABLES (1B) dans les EXTRÉMITÉS INFÉRIEURES (B et C). ÉTAPE 6 Fixer l’autre pièce DESSUS / DESSOUS (E) aux EXTRÉMITÉS INFÉRIEURES (B et C). Utiliser quatre VIS TÊTE PLATE 44,5 mm (2).
ÉTAPE 8 ÉTAPE 9 Relever, avec précaution, l'élément dans sa position verticale. Il est recommandé d'utiliser la CONSOLE DE SÉCURITÉ (7A) pour renforcer la stabilité. Fixer la CONSOLE DE SÉCURITÉ à un poteau dans le mur. Utiliser la VIS TÊTE GOUTTE DE SUIF 25 mm (8). Insérer les SUPPORT DE TABLETTE (3) dans les trous choisis dans les EXTRÉMITÉS (A, B et C). Placer les TABLETTES RÉGLABLES (F) aux SUPPORTS DE TABLETTE.
413324 Use estas instrucciones de ensamblaje en español junto con las figuras paso-a-paso provistas en el folleto inglés. Cada paso en español corresponde al mismo paso en inglés. Se destacan las figuras de cada paso con una tonalidad oscura para mostrar precisamente cual parte se debe montar a la unidad. Compare la “Lista de Part” abajo con la “Part Identification” en el folleto en inglés para familiarizarse con Las partes de ensamblaje.
PASO 1 PASO 5 Ensamble la unidad sobre un piso alfombrado o sobre el cartón vacío para evitar rayar la unidad o el piso. Fije los EXTREMOS INFERIORES (B y C) al ESTANTE INMÓVIL (D). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. Inserte cuatro EXCÉNTRICOS ESCONDIDOS (1B) dentro de los EXTREMOS INFERIORES (B y C). PASO 2 Atornille cuatro BIELAS DE EXCÉNTRICO (1A) dentro del ESTANTE INMÓVIL (D). PASO 6 Fije la otra parte PANEL SUPERIOR / FONDO (E) a los EXTREMOS INFERIORES (B y C).
PASO 8 PASO 9 Cuidadosamente ponga la unidad en posición vertical. Se recomienda que utilice la MÉNSULA DE SEGURIDAD (7A) para aumentar la estabilidad. Fije la MÉNSULA DE SEGURIDAD a un soporte de madera en la pared. Utilice el TORNILLO DE CABEZA REDONDA de 25 mm (8). Inserte los SOPORTES DE ESTANTE (3) dentro de los agujeros a los niveles preferidos de los EXTREMOS (A, B y C). Coloque los ESTANTES AJUSTABLES (F) a los SOPORTES DEL ESTANTE.
WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. • Improper loading can cause the product to be top-heavy. • Risk of injury. • Top-heavy furniture can tip over. • Overloaded shelves can break. • Never exceed the weight limits shown in the instructions.
ADVERTENCIA Por favor use el mobiliario correcta y seguramente. El mal uso puede causar riesgos de seguridad o daño a las unidades o artículos domésticos. Cuidadosamente lea la tabla a continuación. Esté alerto de: Puede ocurrir: Evitar el problema: • Estantes sobrecargados. • Cargar el producto inadecuadamente puede causar la inestabilidad. • Riesgo de lesiones. • El mobiliario inestable puede volcarse. • Estantes sobrecargados pueden romper.
1-YEAR LIMITED WARRANTY 1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of one year from the date of purchase against defects in materials or workmanship of Sauder furniture components. As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 2.
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built. If you need assistance or want to learn more, please contact our award-winning, Ohio-based customer service team at 1-800-445-1527 or Sauder.com. Set a world record for speed? Feeling good about yourself? Nice. Get social with it on any of these quality share sites.