IOTGTWY IoT Gateway User Guide
User Guide for IOT Gateway Copyright © 2020 by Saucon Technologies, Inc. All rights reserved. This publication may not be reproduced in whole or in part, without prior written permission from Saucon Technologies, Inc. Saucon Technologies, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Saucon Technologies, Inc.
FCC / ISED Declaration of Conformity This device contains license-exempt transmitters(s) / receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Caution: Unauthorized modifications or changes not expressly approved by Saucon Technologies, Inc.
Table of Contents: IOTGTWY ...................................................................................................................... 1 IoT Gateway .................................................................................................................... 1 User Guide ...................................................................................................................... 1 Revision History: .................................................................................
Chapter 1: Product Description and Specifications Product Description The IoT Gateway is a multi-purpose device intended for use on vehicles, which extends vehicle area networks for wireless devices. It allows for communication with outside devices over various protocols. These communication protocols are both wired (RS-485, RS-232, CAN) and wireless (Bluetooth Low Energy). The device also includes 2 gate drivers, which can be configured as high side or low side.
Chapter 2: Installation Mechanical Mounting First, choose a location to mount the IOTGTWY within a certain distance of the vehicle component to be controlled. It should be secure from tampering, dry, and more than 12 inches (30 centimeters) from any occupant of the vehicle. Choose a location, which provides for easy routing of wiring and access to power. Obtain mounting screws (two are recommended) that are appropriate for the surface on which you will mount the IOTGTWY Box.
Chapter 3: Troubleshooting / Configuration Power Connection The first step in troubleshooting is to verify power. Make sure that the power is plugged in. Unless specifically enabled, the LED will not illuminate. Diagnostic Cable In order to perform advanced diagnostics, Saucon can provide a diagnostics cable. This cable is connected between Serial A on the IOTGTWY device and a serial port on a computer. Picture above shows IOTGTWY connected to PC with a diagnostic cable.
During radio testing, please disconnect the diagnostic cable connector shown above. Remove the PC and USB cable from the lab before performing radio tests. Open a VT100 emulator (putty, terraterm, etc). Plug the power into the IOTGTWY box. The serial port settings are 115200,N,8,1 The diagnostic cable should be connected before powering the device. When power is applied to the device, you will see the following on the serial console: Pressing enter will bring up a diagnostic menu.
Chapter 4: Safety General Safety Do not operated the Saucon Technologies IOTGTWY in areas near medical equipment, where blasting is in progress, where explosive atmospheres may be present, or near any equipment that may be susceptible to any form of radio interference.
Chapter 5: Warranty and Repairs Saucon Technologies Warranty Statement Saucon Technologies, Inc., (hereafter “Saucon”) warrants that its products will be free from defects in material or workmanship for a period of two years from date of purchase, or if proof of purchase is not provided, 90 days from date of manufacture. SAUCON MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.
For out of warranty repair charges please contact tech support via email support@saucontech.com. Extended warranties are available. Please contact support@saucontech.com for more details. Please direct your questions regarding technical matters, product configuration, verification that the product is defective, repair expediting, shipping or receiving to support@saucontech.
Chapter 6: Reference Information Specifications Operating Temperature Range Storage Temperature Range Voltage Range IP Rating Vibration/Shock -40C to +85C -55C to +105C 3 – 35 Volts DC 6k7 Test for 2g Current Draw Active 12 Volt – 13.4 ma 24 Volt – 10.
Mechanical Drawings FCC ID: (United States) 2AYQW-IOTGTWY IC ID: (Canada) 26966-IOTGTWY Saucon Technologies IOTGTWY Page 13
