CL408e/412e Quick Guide DECLARATION OF CONFORMITY SATO America, Inc. 10350A Nations Ford Road, Charlotte, North Carolina 28273 TEL (704) 644-1650 declare under our sole responsibility that the product CL408e, CL412e complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION Please maintain the distance at least 20 cm (7.9 in) in an uncontrolled environment from the antenna's surface when using the device. See FCC OET Bulletin 56 "Hazards of radio frequency and electromagnetic fields" and Bulletin 65 "Human exposure to radio frequency electromagnetic fields." This device shall not be co-located with any other transmitting antenna.
CL408e/412e Quick Guide Table of Contents What You Get ................................................................................. 3 Controls and Indicators ................................................................... Operator Panel ................................................................... LED Indicators .................................................................... Adjustments ........................................................................ Keys ...................
C L 4 0 8 e /4 1 2 e Q u ic k G u id e W hat You G et T he CL 408e/412e T hermal Transfer printer comes packed in a protective carton.
C L 4 0 8 e /4 1 2 e Q u ic k G u id e C ontrols and I ndicator s Oper ator Panel L E D I ndicator s Status: Dark when Off L ine Green when printer is On L ine. R ed when an error condition exists. L CD Display: Illuminated when power is applied. A djustments (controls behind front panel) Print: A djusts print darkness. Offset: A djusts amount of back/forward feed for dispense/cut/tear-off position. Pitch: A djusts home position of the label +/- 3.75 mm.
C L 4 0 8 e /4 1 2 e Q u ic k G u id e I nitial Set-Up C onnecting the Pr inter 1. L ocate a suitable spot for the printer. It should be within 6 ft. of the host if using an IE E E 1284 Parallel interface or within 35 ft. if using a High Speed R S232 interface. For other types of Plug-In interface cards, see the Operator and Technical R eference Manual. Make sure there is adequate room above and to the right of the printer for the label access door to swing open. 2.
CL408e/412e Quick Guide Safety Information PN9001067 Rev B Page 18
CL408e/412e Quick Guide Safety Information PN9001067 Rev B Page 19
CL408e/412e Quick Guide Safety Information PN9001067 Rev B Page 20
CL408e/412e Quick Guide Safety Information PN9001067 Rev B Page 21