SatKing DVBS-100HD Instruction Manual
SAFETY Safety Precaution The IRD is complied with international safety standards. Please read these simple guidelines carefully before using this device. Power Supply 90–250V AC 50/60Hz. Do Not Dismantle Do not attempt to dismantle the IRD. Opening the cabinet may cause malfunction or electric shock. Avoid Overloading Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. Avoid Extreme Humidity Do not install the IRD in an extreme humid place.
CLEANING Disconnect the STB from the wall outlet before cleaning. Use dry cloth to Dust the STB. Avoid Object and Liquid Entry Do not insert any kinds of small objects, such as a coin, into the IRD as it may result in short circuit. Ventilation Openings and Installation The IRD ’S ventilation openings prevent itself from overheating. Do not block them as it may cause malfunction. Put the IRD on a firm and flat surface. Avoid extreme heat and direct sunlight.
CONTENTS HOW TO USE THIS MANUAL This manual provides complete instructions for installing and using this receiver. SAFETY INSTRUCTIONS 1.Before You Begin 1.1 Features ......................................................................................................... 4 1.2 Accessories .................................................................................................... 4 2.Controls and Functions 2.1 Front Panel........................................................................
1. Before You Begin 1.1 Features 1.1.1 Common Part z Easy Graphic MENU Interface z Supports DiSEqC 1.0/1.
2. Controls and Functions 2.1 Front Panel z Display (4-digits 7-segments / 2LED) The 4-digits displays channel information. The green LED lights up when the channel is locked in. z CH▲/CH▼ Move the cursor up/down in Menu state. Change the current program to the previous/next program in No-Menu state. z VOL◄/ VOL► Moves the cursor left/right in Menu state. Change the volume in No-Menu state z MENU Press to display the Main Menu. z OK Press this button after your selection or correction.
2.2 Remote Control Unit All features of the set-top box can be controlled with the remote controller. z : Press to switch between Operation and Standby modes. z MUTE : Press to temporarily cut off the sound. z NUMBER BUTTONS (0~9): Press to input Channel, Password, PID code and etc. z TV/RADIO: Press to select the TV/RADIO mode. z RECALL: Press to return to the previous channel. z PAGE +/ PAGE - : Page up/down in the channel list. z FAV: Press to display Favorite Channel Mode.
2.3 Rear Panel (The actual production will have difference.) z RS232 Serial Port For firmware update, serial communication port (RS-232). z LNB IN Connect the digital signal from your LNB of your satellite dish to this connector. z LNB OUT Give you the possibility to connect an extra receiver (analogue or digital). z USB Provide for the mobile storage. z YPbPr Connect component video to HD Monitors (YPbPr Type).
3. Connections 3.1 Connecting to TV z Connect the satellite signal from the LNB to the LNB IN connector. z Connect the RCA connector at the back of the receiver to the RCA-in connector on your TV set. 3.2 Connecting to Dish z Connecting a fixed satellite dish to your receiver Make your choice of which satellite you want to receive your signals from, and have your dealer aim your dish at the requested satellite.
4. Setting and Operations 4.1 Before Setting Starting up for the First Time z Turn on your TV and receiver. z If it is the first time using a receiver, you should set parameters for system configuration. After displaying the login screen, press the MENU button. The aside screen will be appeared. Menu Information z The menu consists of main-menu and sub-menu, as you see in the above screen. Main-menu has 4 items and each main-item has its sub-menu items. 4.
4.2.2 Language Setting z In this menu, you can set the language parameters, such as menu language, subtitle language and so on. z Use the ▲/▼ keys to select the item and the ◄/► keys to change the settings. Press EXIT to save your changes and exit the menu. 4.2.3 OSD Setting z In this menu, you can use the ▲/▼ keys to select the item and the ◄/► keys to change the settings. Or you can press OK to view the items’ list, select by ▲/▼. And press OK while you completed choosing.
4.2.5 Schedule Setting z You can program the STB to perform a certain event at a specified time using the Schedule Settings. z Use the ▲/▼button to select the item, and change the parameters using ◄/► button. Schedule: Select the timer that you want to modify. (1- 4) Event: Tune Channel / PVR will switch to tune / record the channel specified at the requested time. Power On / Stand By will turn on / turn off the unit at the time set. Event Reception: Select the timer frequency.
4.3 System z Press OK on System in the main menu, it will turn to the System menu. In this menu you can see the detailed system information, or return the system to the initial status in the Factory Default sub-menu. z When a USB2.0 Storage device is inserted, the USB Function menu will be appeared. z Use the ▲/▼ button to select the item, and OK to enter. 4.3.1 System Information z In the menu, you can see the detaild information of the system loader status.
You can see all the files in the USB storage device. The method of operation refers to the clue on the screen. Select files by ▲/▼, and then operating by the clue. z Red: Press to play or view the selected file. z Green: Press to sort the files. There will be several options you can choose, select one and press OK to achieve the operation. z Yellow: Press to enter the advanced menu to edit the files. You can delete, rename, lock/ unlock the files, set PVR path or even add new folder.
Note:The detailed method of operation refers to the clue appear on the screen. That only MP3 audio files, JPEG or BMP images and recordings made on the USB device can be viewed, any other format is not supported. (Might not be compatible with all devices. ) Files must contain alphanumeric characters only. The following characters “[ 4.4 ] ﹨”etc are not permitted. Setup z If you press OK in Setup Menu, the aside screen will be appeared.
list. If you completed setting, use Red button to Save, Blue button to Save & Exit. z Use Red button to enter the menu of Edit Sat. Antenna: If you press OK in Antenna, the satellites’ list is displayed. Move the cursor to a satellite and press OK to select the satellite and have the list disappeared, or press the EXIT on the remote controller to cancel the setting and have the list disappeared. Type: You can select one LNB type from NORMAL C, NORMAL Ku, UNIVERSAL, ONE CABLE, HIGH Ku or LOW Ku.
4.4.5 TP list In this menu you can edit the TP Frequency information. Show TP of the designated satellite. Signal power and quality is checked on the base of current TP value. z If you want to change to other TP in the Frequency item use ◄/► button or OK button, which will show the TP list. z Press RED button to add a new TP value, Green button to change the current value, Yellow button to delete the current TP value, Blue button to scan by the settings. You can operate correctly by the clew on the screen.
z Press Red buttom to select a channel, and press ▼/▲ to up/down, press OK button to stop move. Press Green button to lock a channel or unlock. If Channel is in the locked status, you must enter password code to view channel. Press Yellow button to skip the channel you choose. Press Blue button to delete channels, you can select to delelte one or all channels. If you want to cancel the operation of deleting, you can press Blue button again.
z Press the Red button to alter the program window. Press the ▼/▲ to select program. Press Yellow button to show the detailed information of the selected programs. If you press the Blue button,the highlighted program will be saved for reserve. z If you have reserved some programs, you can book to record the programs by your purpose. You can operate correctly by the clew on the screen. 4.7 PVR Functions This device has the ability to record content to a USB device by simply inserting into the USB port.
z In the menu of Video/stream, select files by ▲/▼, press OK or PVR► button to play. And then press ◄/► to choose the item under the screen, OK to operate. Or you can press PVR buttons to control. ◄◄: Fast reverse. Play the recording at increased speed. By pressing the button multiple times you select from eight different speeds. ►►: Fast forward (refer to ◄◄).
4.8 TV menu at the normal mode z At normal mode(no menu state), various menus are displayed on the screen with remote control action. You can change the current status and mode with various buttons including the ▲/▼, SAT, i, and EPG button. The follow screen shows the banner displayed when you press the i button. 4.8.1 TV/Radio List in Simple mode z If you press OK on the remote controller at No menu state, the channel list is displayed.
A1 Trouble Shooting There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures shown below. SYMPTOM CAUSE REMEDY The LED doesn ’t The power cord is not Check that the power cord is light up plugged in. plugged into the wall outlet. No picture Wrong connection of the Connect the Audio/Video output of or sound Audio/Video output of the receiver to TV correctly. the receiver to TV. No picture Audio muting. Press the MUTE button.
A2 Specifications 1 Tuner &Channel Type .......................…….....1×F-type,IEC169-24 Female Frequency Range ...............950MHz to 2150MHz Input Impedance .................75 ohm unbalanced Signal Level ...............…......-25 to 65 dBm LNB Power ................…......13.5/18.5Vd ±5%, 0.5Amax, Overload protected 22kHz Tone .................…....Frequency: 22k Hz ±2kHz Amplitude: 0.6V ±0.2V DiSEqC Control ..................Version 1.2 Compatible Demodulation .....................
4 A/V &Data In/Out TV/VCR Scart Output ..…....RGB, CVBS, L, R Output with Volume Control (optional) RCA Output ...........…...…... CVBS, L, R Output (Yellow, White, Red Jack) ............................………..…..with Volume Control 5 Power Supply Input Voltage ...............…..….AC 90~250V, 50/60Hz Power Consumption .....….....Max. 20W Protection ...............…….…...Separate Internal Fuse ...........................…………......
A3 Glossary of Terms C band 3.7~4.2 GHz Frequency. DiSEqC Digital Satellite Equipment Control. Ku band 11~18GHz Frequency. LNB (Low-Noise Block Converter) The LNB is an electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by Satellite receiver. PID Package Identifier. PIN Code Personal Identification Number. A four-digit code that is used for locking/unlocking, e.g. with the parental control feature.