LEIA LUME PAD LPD-10W User Manual Equipment Part Drawing 1
1 Audio Jack 8 Sub Cam 16M 2 TypeC USB 9 Main Cam 16M 3 Light sensing 10 Flash 4 LED indicator 11 Volume up and down 5 Front Cam 8M 12 Power on/off 6 TOF Receiving unit 13 Speeker 7 TOF transmitter unit 14 Mic 15 Touch screen Product feature brief 1. 10.8 inch 2k LCD(2560*1600),2D and 4V light field display。 2. Qualcomm 845,Android 10 3. Main Cam 16M,Sub Cam 8M, support TOF 4. Support many sensors,G-Sensor,Magnet sensor,etc 5.
◆ Power on/off ● Power on:In the power off state, press and hold the power key until the system enter into power on animation, will show lock screen in about 30 seconds, slide to unlock ● Power off: In the power on state, long press the power key for 3 seconds, the screen displays the shutdown confirmation interface, select the shutdown option, the system will shut down ◆ Battery management and charging At the first time, you should charge the battery to 100% to make sure that it is fully charged and t
◆ APK install supports third-party applications based on Android platform, which can be obtained from the network for installation and use.
◆ Music 5
◆ Video playback and picture browsing (Leia player) ◆ File Management Open the file management, you can select files under the corresponding folder according to the storage path, or display and download files according to different file types 6
◆ Browser Google Chrome, click the address bar, enter the website address, click go to and then browse the corresponding website information: 8
◆ Calendar ◆ Calculator 9
◆ Clock 10
◆ Setting ● WIFI Enter the system and automatically find the WiFi network name, as shown in the figure below, multiple WiFi network names have been found, click the network name and enter the password to connect 11
● other connect ● Apps¬ifications 12
● Battery ● Storage 13
● Privacy ● Location 14
● Security ● Accounts 15
● Accessibiliy ● Digital Wellbeing & parental controls 16
● Google ● System 17
● About tablet ● Certification About tablet-Certification 18
● Reset options Note that using the factory default mode will affect some functions and cause data loss ● Software update Before upgrading, please confirm that the tablet has not been installed with an unofficial version, otherwise there is a risk of upgrade failure and unknown problems may be introduced. Before upgrading, please ensure that the battery is above 30%.
Do not disconnect the USB cable during the upgrade process 20
◆Precautions for use In order to give full play to the performance of the new tablet computer and avoid improper operation, please read this operation manual carefully before using this product, thank you. 1. Do not place the tablet computer in hot, cold, dusty, wet and other environments. 2. When using this product, do not let the tablet fall or make the hard object hit the screen, which will cause damage to the screen.
8. If the memory changes or is damaged, so that the tablet cannot be used normally, the user can format the tablet on the computer. 9. Laser certification Note: the company reserves the right to improve products. The performance and function of products with different hardware and software versions may have some differences, so the changes will not be notified.
for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAR Information Statement Your LUME PAD is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AWLP-LPD10-11 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.