Installation Instructions

DC POWER CEILING FAN WALL CONTROL MANUAL
ACTIVATING THE LEARNING PROCESS
1. After installation is complete, AC power is turned on within
30 seconds, open battery cover (with battery, DC3V/CR20321pc,
installed). Then press and hold the FAN button for 3
seconds. The receiver will make sound, Bi, once. This will
indicate the receiver has learned the ID that was previously
selected on the transmitter. Then the transmitter can control
the receiver.
2. If user cannot finish the setting within the 30 seconds time
frame, the main power must be turned off and re-started again.
This will reset the unit. Repeat step 1 until the LEARNING
feature is activated as indicated.
TRANSMITTER OPERATION
Press this button and release instantly to turn on or off the light.
Press and hold to dim or brighten lights to the desired level
and release.
Press this button to set fan wind direction up or down.
Press button for turn on and setting 1~6 fan speed
Press this button to turn the fan off.
When pressing remote button, the LED indicator would be on.
Installing transmitter to wall:
Remove wall plate, disconnect and remove the toggle
switch from wall junction box. Secure wall control unit with
2 screws previously removed. Face plate could be locked
onto the transmitter.
TRANSMITTER