※ INSTALLATION MANUAL We strongly recommend reading the MANUAL before using the product
FCC Compliance LABELLING REQUIREMENTS(Part 15, Section 15.19 (a)(3)) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. The instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual.
1. Contents of FHD-354 1) FHD - 354 2) Driver Installation CD (except the way of IEEE 1394) 3) Interface cable 4) Manual 5) Slide Bar 6) AC Power Code 7) Support Beam 2. Cautions for USB 2.0 1. If the USB 2.0 product is connected to USB 1.1 Host Adapter, it will be operated as speed 1.1 (12Mbps) 2. If you want to use USB 2.0 product as USB 2.0 speed(Max.480Mbps), you have to use USB 2.0 Host Adapter. 3.
. Driver Installation 4-1 Installation of USB 2.0 driver ※ Caution Using below 6GB hard disk can make some troubles like loss of data. We recommend you to use 6GB hard disk or greater 1. **) Caution Using below 2GB hard disk can make some troubles like loss of data, we recommend you to use 2GB hard disk or greater. 1. Driver Installation for Windows 98 1) Insert the offered CD into the CD-ROM drive in computer before you connect the product. 2) Carry out "Win98Setup.
4) Showing up the message "InstallShield Wizard Complete", click "Finish". Then the driver will be installed 5) Connect the AC power cable to FHD-354 and outlet then make the power "on" of FHD-354. 6) Connect FCD-354 to USB port in computer.
**) caution The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 the way of PARTITION and FORMAT" 2. Windows ME 1) You should connect the AC cord to the FHD-354 and turn the power(switch) on after the computer boot-up. 2) You should connect the FHD-354 to USB port on the system. 3) Finding out the new hardware "USB Mass Storage Device", the driver will be installed automatically.
5) etc..the files can be required. The files are in the base2.cab in WIN9X folder in Windows ME original CD. ※ Caution : The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 How to PARTITION and FORMAT" Then the drive will be installed in "my computer" 3. Windows 2000 1) You should connect the AC cord to the FHD-354 and turn the power(switch) on after the computer boot-up.
4) Finding out the new hardware "USB Mass Storage Device", the driver will be installed automatically. 5) The drive icon will be installed in "my computer" ※ Caution : The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 How to PARTITION and FORMAT" Then the drive will be installed in "my computer" 4.
the computer boot-up. 2)You should connect the FHD-354 to USB port on the system. 3) Finding out the new hardware "USB Mass Storage Device", the driver will be installed automatically. 4) The drive icon will be installed in "my computer" ※ Caution : The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 How to PARTITION and FORMAT" Then the drive will be installed in "my computer" 5.
6. Checking the driver installation Make sure if the driver is connected successfully on the OS position.
2) Windows 2000/XP Control panel -> System -> Hardware -> Device manager -> Universal series Bus Controller 7. How to stop using the FHD-354UFb (This is for USB interface only.) To disconnect the FHD-354Ufb from the system, please do as following instruction. 1) Windows 98 ① Execute the “Remove.exe” file in “Hi-Speed USB-to-IDE Win98 Driver” in Program Files in C: drive.
② Select the HDD model to remove it as following picture. ③ Disconnect the USB data cable from the USB port when you get the following message.
2) Windows ME/2000/XP ①) Point your cursor to the “removable HDD” icon in task bar and click the left mouse button to remove it. ②) Click the above message then, the following message will appear. Now, you can safely remove the FHD-354Ufb.
5-2 Installation of IEEE 1394 ※ Caution 1. Turn on the power to satisfy the plug & play function of window and then connect to the IEEE1394 in computer 2. If the IEEE 1394 port has 4 pins or using Card Bus way of notebook computer, the power can not be supplied. Please connect the power adapter or USB power cable. 1.
※ Caution : The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 the way of PARTITION and FORMAT" Then the drive will be installed in "my computer" ■ Checking the installation : After finishing the installation Control panel -> System --> Hardware -> Device manager -> Disk drive --> Sarotech Co.,Ltd.
2.
※ Caution : The new hard disk which doesn't have FDISK and FORMAT, can not be recognized in "my computer" If you want to FDISK and FORMAT, you have to follow the way in "NO. 6 the way of PARTITION and FORMAT" Then the drive will be installed in "my computer" ■ Checking the installation : After finishing the installation, please check if the below things are showing up.
1394/USB Disk ▶Control panel -> System -> Device manager --> SBP2 --> SBP2 Compliant IEEE1394 device 3.
■ Checking the installation : After finishing the installation Control panel -> System --> Hardware -> Device manager -> Disk drive --> Oxford Semiconductor Ltd.
4. MAC OS If it is over MAC 8.6 and over Firewire enabler 2.7, it will be installed automatically without any special driver. ※ Caution : 1. Should be over MAC OS 8.6 2. The hard disk which doesn't have FDISK and FORMAT, can not be recognized 3. If you want to use it in MAC and IBM, please carry out the FDISK and FORMAT in IBM computer. ● MAC OS 8.6 and 9X version 1) Booting MAC OS before connecting the product 2) Install the driver on the below part of offered driver CD Carry out MAC OS \ Firewire \ OS 8.
5) Choose the "No.5 change the present hard disk" among the fdisk options. 6) Choose the last number in change the " hard disk drive" -> type the hard disk number of fdisk in " type the hard disk number" -> press "Enter" ※ Caution : If you connect several hard disk, you could have wrong number. Please choose the 0% number as the picture. 7) Press "Esc" -> choose the "No. 1 select the logic dos drive or partition" among the fdisk option items -> type "No.1" -> press "Enter" 8) Choose "No.
7) Click the drive of "not allotted" in disk management with the right side of Mouse. 8) Choose the "making partition" among the menu. 9) After complete the "making partition magician" click "Next" 10) Checking if the "main partition(P)" is selected in kinds of partition, click "Next" 11) Type the needed capacity at "disk space" among the partition and click Next" 12) If the drive word is allotted, click "Next" 13) Choose the kind of file system (NTFS or FAT32) among the partition format.
choose management 4) Click "not allotted (ex.
7. Please check when you have some troubles 1. Loss of data Completing the disk slice assemble or checking the disk error with "precision", the data can bring a loss. Please avoid above operations. 2. Finding the message "HI-SPEED USB INSTALLATION is fixed incorrectly to HI-SPEED USB INSTALLATION herb" It means the USB 2.0 product is connected to USB 1.1 Host Adapter on Windows XP. USB 2.0 product(max. 480Mbps) is connected to USB 1.1 Host Adapter and it works USB 1.1 speed(max. 12Mbps) 3.
Specification ▶Model : FHD-354 ▶Interface : USB 2.0 / Firewire ▶Data transmission speed : 480Mbps(USB 2.0) / 800Mbps(Firewire) ▶Size : 127.2 x 75.6 x 15.5mm ▶Weight : with hard (180g) , without hard (90g) ▶Power : Interface power or adapter ▶Support OS : USB 2.0 - Windows ME/2000/XP, Mac OS 9.x/X.x IEEE 1394 - Windows 98 SE/ME/2000/XP, Mac OS 8.6/9.x/X.
