INSTALLATION MANUAL We strongly recommend reading the MANUAL before using the product
FCC Compliance LABELLING REQUIREMENTS(Part 15, Section 15.19 (a)(3)) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. The instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual.
Information FCC Compliance -------------------------------------------------------------------------------------- 1 Information ---------------------------------------------------------------------------------------------- 2 No.1 ■ How to Make USB products -------------------------------------------------------- 3 ■ How to use USB power cable ------------------------------------------------------ 6 No.2 Contents of FHD-181 --------------------------------------------------------------------- 8 No.
1. USB Fine out the 2 USB port in computer, connect the offered USB power cable to USB port in computer. And for another USB port, connect to the USB cable also for supplying the electricity. 2. IEEE 1394 If the IEEE 1394 port of notebook computer is 4 pin port or be used as CardBus way, the power is not supplied to IEEE 1394 Bus. So connect the USB power cable like the picture.
2. Contents of FHD-181 1) FHD - 181 2) Driver Installation CD 3) Bag 4) Interface cable 5) Manual 6) USB power cable (if USB bus power doesn't work, please connect it) 3. Cautions for USB 2.0 1. If the USB 2.0 product is connected to USB 1.1 Host Adapter, it will be operated as speed 1.1 (12Mbps) 2. If you want to use USB 2.0 product as USB 2.0 speed(Max.
you have to use USB 2.0 Host Adapter. 4. System Requirement ■ 586 Pentium or greater or MAC ■ USB port has to be possible to use ■ Included CD-ROM drive or the driver should be possible to be downloaded from internet web site. Caution Keep away from magnetic substance. Data may be corrupted. Keep away from physical or electric shock, it may malfunction or damage. Be careful not to drop AivX, it may cause HDD malfunction. Keep AivX away from heat or fire. Do not keep AivX in humid place.
3) Click “Next” button after operates “Install Shield Wizard” 6
4) Click “Next” button after select “I accept the terms of the license agreement” 5) When you see the message of “InstallShield Wizard Complete” then click “Finish” button to complete the driver installation.
6) Connect the FHD-181 to the USB port in computer. 7) The drive icon will be installed in "My computer" 2. Windows ME 1) Connect the FHD-181 to the USB port in computer 2) Finding out the new hardware "USB Mass Storage Device", the driver will be installed automatically.
4) etc..the files can be required. The files are in the base2.cab in WIN9X folder in Windows ME original CD. 3. Windows 2000/XP 1) Connect the FHD-181 to the USB port in computer 2) Finding out the new hardware "USB Mass Storage Device", the driver will be installed automatically.
4. MAC For MAC OS 9.x or greater, the driver will be recognized without any other driver. 5. Checking the driver installation Make sure if the driver is connected successfully on the OS position.
2) Windows ME Control panel -> System -> Device manager -> Universal serial Bus Controllers 11
3) Windows 2000/XP Control panel -> System -> Hardware -> Device manager -> Universal serial Bus Controllers 12
6. How to stop the product If you want to stop and separate the product when you are using it, please follow the below 1) Windows 98/ME/2000/XP Click the "tray icon" under the "start" and then you can find the below drawing Read the message and click ok .
6-1 Installation of IEEE 1394 Caution 1. Turn on the power to satisfy the plug &play function of window and then connect to the IEEE1394 in computer 2. If the IEEE 1394 port has 4 pins or using Card Bus way of notebook computer, the power can not be supplied. Please connect the power adapter or USB power cable. 1.
-> System --> Hardware -> Device manager -> Storage device --> IEEE 1394 Disk 2.
Checking the installation : After finishing the installation, please check if the below things are showing up. Control panel --> System --> Device manager -> Hard disk model in Disk drive Control panel -> System -> Device manager --> Storage device --> IEEE 1394 Disk Control panel -> System -> Device manager --> SBP2 --> SBP2 Compliant IEEE1394 device 3.
Checking the installation : After finishing the installation Control panel -> System --> Hardware -> Device manager -> Disk drive --> Sarotech Co._Ltd.
4. MAC OS If it is over MAC 8.6 and over Firewire enabler 2.7, it will be installed automatically without any special driver. Caution : 1. Should be over MAC OS 8.6 2. The hard disk which doesn't have FDISK and FORMAT, can not be recognized 3. If you want to use it in MAC and IBM, please carry out the FDISK and FORMAT in IBM computer. MAC OS 8.6 and 9X version 1) Booting MAC OS before connecting the product 2) Install the driver on the below part of offered driver CD Carry out MAC OS \ Firewire \ OS 8.6-9.
5-3 Driver installation of IEEE 1394 + USB Combo Please refer to the USB 2.0 driver installation on "No. 5 - Driver installation" and also refer to the driver installation of IEEE 1394 6. Please check when you have some troubles 1. Loss of data Completing the disk slice assemble or checking the disk error with "precision", the data can bring a loss. Please avoid above operations. 2. Finding the message "HI-SPEED USB INSTALLATION is fixed incorrectly to HI-SPEED USB INSTALLATION herb" It means the USB 2.
Specification Model : FHD-181 Interface : USB 2.0 / IEEE 1394a Data transmission speed : 480Mbps(Max) / 400Mbps(Max) Size : : 61.4mm x 16.3mm x 104mm(W x H x D) Weight : 120g(with HDD) Power : Interface power or Adapter Support OS : USB 2.0 - Windows 98/98 SE/ME/2000/XP, Mac OS 9.x/X.x IEEE 1394 a - Windows 98 SE/ME/2000/XP, Mac OS 8.6/9.x/X.
