User's Manual

ManualsBrandsSarotech ManualsElectronicsExternal CD-R/CD-RW Drive

1. Hold the above upper and below case of the product

and draw the upper case.

2.Connect the CD-ROM/CD-RW drive, that is

prepared in the below case, to each cable.

Connect the cable refer to the drawing and try to

connect by the color of the drawing.

3. Put the CD-ROM/CD-RW to the fixing plate as the

d r a w i n g .

4 . Tighten up the 4 screws after cover the upper case.

5. Connect the power adapter(AC/DC) to the DC Jack of FCD-523 and connect the AC power

cable to the power outlet.

-. C a u t i o n : You should be Jumper of CD-ROM/RW to Master on the mount FCD-523.

1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-RW )

1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )1. How to the Drive(CD-ROM/CD-R W )

1. How to the Drive(CD-ROM/CD-R W )

Summary of content (10 pages)

PAGE 1
. How How to to the W)) 1. the Drive(CD-ROM/CD-R Drive(CD-ROM/CD-R W 1. Hold the above upper and below case of the product and draw the upper case. 2.Connect the CD-ROM/CD-RW drive, that is prepared in the below case, to each cable. Connect the cable refer to the drawing and try to connect by the color of the drawing. 3. Put the CD-ROM/CD-RW to the fixing plate as the drawing. 4. Tighten up the 4 screws after cover the upper case. 5.
PAGE 2
. Package Package Contains Contains 2. 1) FCD-523 Case 3) Interface Cable 5) Power Adapter 2) Install CD Driver 4) Guide Manual 6) AC Power Cable 3. System System Requir 3. Requir eem meenntt 586, Pentium or Greater System can use the Interface port Included CD-ROM Drive or you can download the Driver from Internet web Site. 4. Driver Driver Installation Installation 4. Caution: Connect the product after carry out the "Tppinst" first Caution: Use USB2.0 1) If the USB2.0 product is connected to USB1.
PAGE 3
2. For Window ME 1) Confirm if the power adapter is connected to the outlet and FCD-523 and the turn on the power. 2) Booting the Windows ME. 3) Connect the offered interface cable to FCD-523. And then connect to USB port in Computer. 4) Can find the message "USB Big capacity preservation installation. 5) Find the model like CD-ROM/CD-RW (ex.:LG LED-8120B USB Device). 6) Coming out to the "USB CD-ROM" confirm if the CD-ROM drive icon is appearing in "My Computer".
PAGE 4
. For Window XP 1) Confirm if the power adapter is connected to the outlet and FCD-523 and the turn on the power. 2) Booting the Windows ME. 3) Connect the offered interface cable to FCD-523. 4) Then connect to the USB port in Computer. 5) In Windows XP, it will be recognized with "ScanLogic USBIDE" without Driver Caution: Do not install with the drive in "Win 98" folder of driver installation disk. Driver Installation for USB2.0 1. For Window 98/ME/2000 1) Do not connect the product, first.
PAGE 5
6) Then connect the interface cable to the interface port in Computer 7) Confirm if the CD-ROM drive icon is appearing in "My Computer" 2. For Window XP 1) Confirm if the power adapter is connected to the outlet and FCD-523 and the turn on the power. 2) Booting the Window XP. 3) First, connect the offered USB cable to the FCD-523. 4) Then connect to the Interface port in Computer. 5) Can find the message "USB Big capacity preservation installation. 6) Find the model like CD-ROM/CD-RW (Ex.
PAGE 6
4) Then, connect to the IEEE 1394port in Computer. 5) Find the message "Insert the Disk" then insert the "Window 98 SE CD-ROM" to CDROM drive and then click the "Confirmation". The driver will be installed automatically. 6) Coming out to the "USB CD-ROM" confirm if the CD-ROM drive icon is appearing in "My Computer".
PAGE 7
2. For Window 2000 Control Panel- System- HardwareDevice Manager-Universal Series Bus Controller 3. For Window XP Control Panel- System-HardwareDevice Manager How to stop the product If you want to separate the product, please do as follow; 1. Click the "Tray icon" once that is under the "start operation indication line". You can see same thing as the drawing. 2. If you choose it, you can find the message as below; at that time, separate the product the product from the Interface port.
PAGE 8
SSppeecciiffiiaaccttiioonn Model FCD-523 Interface USB 1.1/2.
PAGE 9
FCC Compliance Compliance FCC This equipment has been tested and found to comply with the limiteds for a Class B digital device, pursuant to part 15 of the FCC rules. This limited are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference will not occur in a particular installation.
PAGE 10
U s e r 's G u i d e EXTERNAL CD-ROM/CD-RW(FCD-523) INSTALLATION MANUAL We strongly recommend reading the MANUAL before using the product